Author |
Topic: HBC (Read 584 times) |
|
gost
Full Member
I'm a YaBB newbie!
 
Posts: 491
|
Hi gents, have error code 07 on cc HBC module faulty, went to FMD had trouble identifying part, came up with Resistor assembly part no F1017490, want £160 + vat!!! is that the right part?
|
|
 IP Logged |
2.3 ultima
|
|
|
Jonnycab
Senior Member
Former owner of 2.3 Ultima Facelift saloon
Posts: 3900
|
 |
Re: HBC
« Reply #1 on: Aug 19th, 2008, 4:15pm » |
 Quote  Modify
|
Hi Gost, just had a look at my HBC & the part no is '96GW 19E624AA'. I'm sure new ones are around the £100 mark 
Hope this helps 
|
|
IP Logged |
|
|
|
gost
Full Member
I'm a YaBB newbie!
Posts: 491
|
|
Re: HBC
« Reply #2 on: Aug 19th, 2008, 4:43pm » |
Quote Modify
|
Thanks Jonnycab, looks like i will have to put up with it for a while lol
|
|
IP Logged |
2.3 ultima
|
|
|
Simmo
Administrator
I'm an OAP !
Posts: 5508
|
|
Re: HBC
« Reply #3 on: Aug 19th, 2008, 5:20pm » |
Quote Modify
|
Bruce, There are two types of control. One is essentially a unit with a large aluminium Heat sink and the other has three resistors. Details of both are on the site and I will try and locate the diagrams/pictures. They are very expensive but you should be able to get one from a member or a scrapper.
HERE is the thermal fuse and Here is the HBC.
|
|
IP Logged |
Now I'm an OAP
|
|
|
gost
Full Member
I'm a YaBB newbie!
Posts: 491
|
|
Re: HBC
« Reply #4 on: Aug 19th, 2008, 6:34pm » |
Quote Modify
|
Thanks for that Mike, but my point is that on cc self diagnostics i get 07 which is HBC module, but local FMD cant seem to find it on comoputer, what they come up with is Resistor Assembly, do u think that is right part, also do u think it safe to get from scrapper I suppose it depends how much, then may be worth it. How would i describe it if i try scrapper online
|
|
IP Logged |
2.3 ultima
|
|
|
Simmo
Administrator
I'm an OAP !
Posts: 5508
|
|
Re: HBC
« Reply #6 on: Aug 19th, 2008, 8:00pm » |
Quote Modify
|
Bruce, If it is the HBC module which I and Tompion have shown in the pictures hang on until the next Kent meet and I'll make sure I have one wth me for you to try. You know how Dave likes to get his hands dirty under your bonnet !!  . Have you removed it, a simple job, to check the type of unit?.
|
|
IP Logged |
Now I'm an OAP
|
|
|
gost
Full Member
I'm a YaBB newbie!
Posts: 491
|
|
Re: HBC
« Reply #7 on: Aug 19th, 2008, 8:05pm » |
Quote Modify
|
Thanks MIke, will hang on till next kent meet, many thanks
|
|
IP Logged |
2.3 ultima
|
|
|
gozz
Senior Member
Been around awhile
Posts: 3475
|
|
Re: HBC
« Reply #8 on: Aug 19th, 2008, 8:51pm » |
Quote Modify
|
gost.
The triple resistance unit,with three spring like windings is only fitted to Scorps without aircon or with straight aircon,it just controls the fan speed.Yours as you say will have the HBC unit.If you give jonnycab's number to Mr Ford,he will be able to give you the FINIS code,which may be the number you have.
GOZZ.
|
|
IP Logged |
|
|
|
gost
Full Member
I'm a YaBB newbie!
Posts: 491
|
|
Re: HBC
« Reply #9 on: Aug 20th, 2008, 8:12pm » |
Quote Modify
|
Thanks Goss, but i think ill wait for kent meet first before doing anything else, many thanks
|
|
IP Logged |
2.3 ultima
|
|
|
Jonnycab
Senior Member
Former owner of 2.3 Ultima Facelift saloon
Posts: 3900
|
|
Re: HBC
« Reply #10 on: Aug 21st, 2008, 3:56am » |
Quote Modify
|
If the blower seems to blow okay & you don't notice it completely cutting out, then I wouldn't worry too much about the 07 code. It may just be a small fault with the HBC causing it to (un-noticably) hiccup slightly every now & then
|
|
IP Logged |
|
|
|
gost
Full Member
I'm a YaBB newbie!
Posts: 491
|
|
Re: HBC
« Reply #11 on: Aug 21st, 2008, 9:07pm » |
Quote Modify
|
HI Jonnycab, blower doesnt work at all, even manually
|
|
IP Logged |
2.3 ultima
|
|
|
gost
Full Member
I'm a YaBB newbie!
Posts: 491
|
|
Re: HBC
« Reply #13 on: Aug 22nd, 2008, 5:35pm » |
Quote Modify
|
Hi Snoopy, at least FMD got it right, thats the finis number they quoted, but its #189.08 inc vat!!!!
|
|
IP Logged |
2.3 ultima
|
|
|
Jonnycab
Senior Member
Former owner of 2.3 Ultima Facelift saloon
Posts: 3900
|
|
Re: HBC
« Reply #14 on: Aug 22nd, 2008, 6:22pm » |
Quote Modify
|
..... 
|
|
IP Logged |
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print
