Author |
Topic: 2.3 Inlet Manifold (Read 1301 times) |
|
Kenboy
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif) I'm a YaBB newbie!
Posts: 703
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
2.3 Inlet Manifold
« on: Apr 26th, 2009, 5:23pm » |
Quote Modify
|
Hi I am trying to source one of these and I know it is going to be difficult in doing so, but should I have the good fortune I would like your advice on removing and replacing the said item. I cannot find any reference on the CD that I have. Many Thanks Kenboy
|
|
IP Logged |
|
|
|
Tompion
Administrator
![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif)
![](http://i.imgur.com/YwLOTZk.jpg)
1997 2.3 Ultima estate.
Posts: 2918
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: 2.3 Inlet Manifold
« Reply #1 on: Apr 26th, 2009, 8:04pm » |
Quote Modify
|
The pdf "cylinder head renew" here: http://www.fordscorpio.co.uk/DOHC2-3manual.htm gives a reasonable indication of what's involved. The 2 manifold studs/nuts need to come out as well as the 4 bolts. There's a vertical bolt not shown that is tricky to get at, you need get underneath with a long socket bar. Dave
|
|
IP Logged |
ABS multiplug wheel sensor pins MK IV or MK 20
|
|
|
|