Author |
Topic: ford puma locked out (Read 3311 times) |
|
5stud
Full Member
I'm a YaBB newbie!
Posts: 436
|
 |
ford puma locked out
« on: Jul 4th, 2011, 11:09am » |
 Quote  Modify
|
brother had a brakein and a towrag nicked a bunch of keys.including a puma key all the rest of the cars have responded to the old coat hanger but not the puma.if a member can get into a puma give me a pm
|
|
 IP Logged |
|
|
|
Dave2302
Senior Member
2006 Mercedes S55 AMG, Retired Barefoot Waterskier
Posts: 1119
|
|
Re: ford puma locked out
« Reply #1 on: Jul 6th, 2011, 10:35am » |
Quote Modify
|
The Puma can be got into with the same method, but you need some wire about twice as thick as a coat hanger (around 4mm) with an 'P' shape bent at one end and a 90 degree bend at the hand end  ..............
This is because once you get behind the interior handle with the 'P' you need to twist the 'P' to flick the handle out, normal coat hanger just bends
Note for Mods.......... This info is no good to car theives because the Puma has PATS built in to the EECV, so it will not start without the right key
Cheers Dave
|
|
IP Logged |
Dave "The 'ol Bear" ex Footer !
|
|
|
Highlander
Moderator
Expert
13 Scorpios, XR4x4, Suzuki SJ413 for off road :)
Posts: 8244
|
|
Re: ford puma locked out
« Reply #2 on: Jul 6th, 2011, 10:44am » |
Quote Modify
|
on Jul 6th, 2011, 10:35am, Dave2302 wrote:The Puma can be got into with the same method, but you need some wire about twice as thick as a coat hanger (around 4mm) with an 'P' shape bent at one end and a 90 degree bend at the hand end ..............
This is because once you get behind the interior handle with the 'P' you need to twist the 'P' to flick the handle out, normal coat hanger just bends
Note for Mods.......... This info is no good to car theives because the Puma has PATS built in to the EECV, so it will not start without the right key
Cheers Dave |
|
Spoken like a true car thief! 
Does the Puma not deadlock like the Scorpio?
i can't open Scorpios with a coathanger
|
|
IP Logged |
on Oct 17th, 2011, 12:35pm, Simmo wrote:I give up !  Too much for an old boy!  |
|
|
|
|
5stud
Full Member
I'm a YaBB newbie!
Posts: 436
|
|
Re: ford puma locked out
« Reply #3 on: Jul 6th, 2011, 11:09am » |
Quote Modify
|
yes they have deadlocks so you cant open the doors if you smash a window.but if you use a small angel grinder on the o/s rear light you can get in and pop the taillgate take out the lock and get the code to cut a new key bit animalish but needs must.
|
|
IP Logged |
|
|
|
Snoopy
Administrator
Very old.BAD tempered and missing friends.
Posts: 6278
|
|
Re: ford puma locked out
« Reply #4 on: Jul 7th, 2011, 8:36am » |
Quote Modify
|
there is no need to resort to such violence to gain access to a LOCKED scorpio . I have a none intrusive method if ever it happens............! NEVER to be given out on here though...
|
|
IP Logged |
HELP the FORUM.Please DONATE
|
|
|
Dave2302
Senior Member
2006 Mercedes S55 AMG, Retired Barefoot Waterskier
Posts: 1119
|
|
Re: ford puma locked out
« Reply #5 on: Jul 7th, 2011, 2:44pm » |
Quote Modify
|
Can't be all Puma's that Deadlock,, mines a V reg, originally a 1.7 Lux, and that didn't deadlock when the keys got locked in
Cheers Dave
|
|
IP Logged |
Dave "The 'ol Bear" ex Footer !
|
|
|
5stud
Full Member
I'm a YaBB newbie!
Posts: 436
|
|
Re: ford puma locked out
« Reply #6 on: Jul 12th, 2011, 10:18am » |
Quote Modify
|
are you sure..brouthers misis hase a s and v reg[ and they bouth dead lock if you lock them twice .and ther bouth low speck
|
|
IP Logged |
|
|
|
Dave2302
Senior Member
2006 Mercedes S55 AMG, Retired Barefoot Waterskier
Posts: 1119
|
|
Re: ford puma locked out
« Reply #7 on: Jul 13th, 2011, 9:04am » |
Quote Modify
|
Ah, like the old Vauxhalls then,
When it happened to mine it must have only had one press, it was when I first got it, before I stripped it all down to start the project 
Guess I just got lucky then...........
I'll check that when the wiring is all back in it
Cheers Dave
|
|
IP Logged |
Dave "The 'ol Bear" ex Footer !
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print