Author |
Topic: front wheel bearing (Read 801 times) |
|
ren
Full Member
95 N 2.9 24v Cossie Estate
Posts: 480
|
 |
front wheel bearing
« on: Feb 11th, 2005, 10:30pm » |
 Quote  Modify
|
Took wheel off expecting to see
a nut holding the hub on,(may have
to change the bearing,)and removal
requires a hexkey anyone tell me the
size required.
Ren
|
|
 IP Logged |
|
|
|
wumpster
Guest
|
got a spare screwdriver if its any good lmao 
|
|
IP Logged |
|
|
|
ren
Full Member
95 N 2.9 24v Cossie Estate
Posts: 480
|
|
Re: front wheel bearing
« Reply #2 on: Feb 11th, 2005, 11:45pm » |
Quote Modify
|
Thought you needed that to plug
the hole in the manifold,
any luck in traceing a replacement.
Ren
|
|
IP Logged |
|
|
|
wumpster
Guest
|
like trying to find rocking horse dung  got a mate he is a blacksmith he might be my next call see if he can do any thing with it 
|
|
IP Logged |
|
|
|
Snoopy
Administrator
Very old.BAD tempered and missing friends.
Posts: 6278
|
|
Re: front wheel bearing
« Reply #4 on: Feb 12th, 2005, 8:06am » |
Quote Modify
|
I think that you may find that you have to remove the spindle carrier to replace the front wheel bearings... in that case the hub can be held in a vice and the nut undone from the back. I do NOT think that you will be able to replace it in position.. but I may be wrong on that one. But as regards the size of the hex key sorry cant help with that one..
HTH Snoopy
|
|
IP Logged |
HELP the FORUM.Please DONATE
|
|
|
ren
Full Member
95 N 2.9 24v Cossie Estate
Posts: 480
|
|
Re: front wheel bearing
« Reply #5 on: Feb 12th, 2005, 9:09am » |
Quote Modify
|
Snoopy
Thanks for that,couldnt find anything
on the main site relateing to the removal
of the spindle carrier to change the bearing.
Cheers for that
Ren
|
|
IP Logged |
|
|
|
ren
Full Member
95 N 2.9 24v Cossie Estate
Posts: 480
|
|
Re: front wheel bearing
« Reply #7 on: Feb 12th, 2005, 9:38pm » |
Quote Modify
|
Snoopy
Yes i had seen that one,but i hadnt
read it that you must first remove the
spindle carrier before the wheel bearing
can be changed,as you said b/f you dont
think it can be done in posistion and you
may be wrong on that.
But your not according to the pdf.
Thanks for getting me the info required
Ren
|
|
IP Logged |
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print
Remove