Author |
Topic: HO2S wiring (Read 664 times) |
|
keith_f
Newbie
1998 24v ultima saloon
Posts: 44
|
|
HO2S wiring
« on: Feb 18th, 2005, 2:40pm » |
Quote Modify
|
I am changing the 2 rear HO2S sensors this weekend because that nice man 'Waders' checked them for me at the last Herts meeting, before I start does any know if the colour of the wires on the orignal sensors are the same as the new ones from Cats direct ? they are the 4 wire type, the instruction in the box don't show the colour code for Fords. Thanks Keith
|
|
IP Logged |
|
|
|
keith_f
Newbie
1998 24v ultima saloon
Posts: 44
|
|
Re: HO2S wiring
« Reply #2 on: Feb 18th, 2005, 2:59pm » |
Quote Modify
|
No thanks Snoopy I have already seen that I was concerned that the colours of the wires on the origanls would be diffrent to the new ones and I wouldn't know which was the earth or live ? Thanks keith
|
|
IP Logged |
|
|
|
Snoopy
Administrator
Very old.BAD tempered and missing friends.
Posts: 6278
|
|
Re: HO2S wiring
« Reply #3 on: Feb 18th, 2005, 3:07pm » |
Quote Modify
|
Well usually the BLACK wire is Earth on FORD cars and is so on the wiring on the Scorpio.. Have you looked here for the info you require, its all the wiring Diagrams http://www.carsoft.ru/avtorepair/sierra_el.html
|
|
IP Logged |
HELP the FORUM.Please DONATE
|
|
|
keith_f
Newbie
1998 24v ultima saloon
Posts: 44
|
|
Re: HO2S wiring
« Reply #4 on: Feb 18th, 2005, 3:18pm » |
Quote Modify
|
thats a great shortcut I should be able to work it out from here. thanks again Keith
|
|
IP Logged |
|
|
|
TaperOne
Junior Member
135k 98 2.3 Ultima Estate
Posts: 89
|
|
Re: HO2S wiring
« Reply #5 on: Feb 18th, 2005, 4:32pm » |
Quote Modify
|
HI, Only checked the colours of my sensor the other day in preparation for similar situation, except mines a 2.3 with only one pr-cat sensor. Anyway, the colours are 2 black 2 white This probably means the whites are + and the blacks are -, one pair for heater and one pair for sensor. This is only an educated guess as I have not actualy removed the old one yet. HTH Regards Pete
|
|
IP Logged |
|
|
|
keith_f
Newbie
1998 24v ultima saloon
Posts: 44
|
|
Re: HO2S wiring
« Reply #6 on: Feb 21st, 2005, 8:07am » |
Quote Modify
|
I changed the sensors over the weekend and there was 2 white 1 black & 1 grey wires the same colours as the new ones from Cats Direct so straight foward in the end apart from having to heat up the thread to free off.
|
|
IP Logged |
|
|
|
waders
Guest
|
Hi Keith, If you want me to check the new sensors and clear any codes stored send me a PM Barry.
|
|
IP Logged |
|
|
|
|