Author |
Topic: engine under tray (Read 776 times) |
|
webbo67
Newbie
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/fredflinstone.gif) I'm a YaBB newbie!
Posts: 15
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
engine under tray
« on: Apr 20th, 2005, 1:44pm » |
Quote Modify
|
Hi all Just purchased an engine under tray and noticed that there are 16 fixing holes. 12 one size and 4 larger ones. I purchased the fixing kit from ford parts uk and it contains only 10 fixing screws(all the same size). Just wondering if anyone knows if all 16 holes are used and if they aren't then which 10 are. Thanks Andy
|
|
IP Logged |
|
|
|
Kenboy
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif) I'm a YaBB newbie!
Posts: 703
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: engine under tray
« Reply #1 on: Apr 20th, 2005, 2:58pm » |
Quote Modify
|
Hi Andy It is just the four large holes that are used I have no idea were the other ones come from but there are only four on mine?. Regards Kenboy
|
|
IP Logged |
|
|
|
martin_rowe
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/homer.gif) I love YaBB 1G - SP1!
Posts: 879
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: engine under tray
« Reply #2 on: Apr 20th, 2005, 4:07pm » |
Quote Modify
|
the tray mounts with just the 4 outer (large) holes, the others are there for the rivets that hold in the foam padding, you get 10 screws becaust that is the pack quantity. Martin
|
|
IP Logged |
Rally Drivers Do It Sideways
|
|
|
Simmo
Administrator
![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif) I'm an OAP !
Posts: 5508
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: engine under tray
« Reply #3 on: Apr 20th, 2005, 8:08pm » |
Quote Modify
|
On my 2ltr the tray fixes with only four screws as allready stated. If you look under the car there should be four red(in my case) nylon inserts in the chassis corresponding with the four holes in the tray. Push the tray at an angle up and over the mounting at the rear of the engine then slide forward to sit behind the bumper and locate the four torx screws as indicated,two each side.HTH.Simmo
|
|
IP Logged |
Now I'm an OAP
|
|
|
webbo67
Newbie
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/fredflinstone.gif) I'm a YaBB newbie!
Posts: 15
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: engine under tray
« Reply #4 on: Apr 21st, 2005, 1:48am » |
Quote Modify
|
Thanks Guys Andy
|
|
IP Logged |
|
|
|
|