Author |
Topic: mirrors (Read 539 times) |
|
armatec
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](http://i114.photobucket.com/albums/n252/parrotlovers/SCORP.jpg)
ONE DAY I WILL UNDERSTAND THESE CARS!
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 185
|
hi all, prior to its trip to the scrap yard i would like to take the following off my old beloved scorp. 1) the interior mirror 2) the 2 door mirrors 3) all the stalks on the stearing colum any one tell me how to take these off? many thanks in advance kev
|
|
IP Logged |
1997 2.3 ULTIMA ESTATE
|
|
|
cossieguy
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](http://s105.photobucket.com/albums/m239/guywatkins2002/th_Clean1.jpg)
1996 Cosworth Ultima saloon
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 550
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: mirrors
« Reply #1 on: Dec 9th, 2006, 12:36pm » |
Quote Modify
|
1, Interior mirror- Remove vanity light and unplug. Should give you enough access to unlug mirror from its plug. Feed plug back into "Cabin" by gently pulling back roof lining where it meets front screen. Remove mirror from its mounting by gently pulling it towards bottom of w/screen. Dont pull it out towards cabin. 2, Mirrors are a bit more involved but if you're scrapping you can be a bit less careful! You need to remove the door card/handles etc to get back to the door skin, peel the top right sound proofing back. Then its just a case of unplugging the mirror from it's door control module plugs, 1 black 1 white. Feed the cables back towards the mirror. You might find it easier to remove the mirror(3 bolts) first and let it hang by door. The plugs aren't easy to get out but be patient they do come out one at a time. 3. Never done this on the scorp but have on a mondeo and i think it will just be a case of removing the cowling from the top of the steering wheel and they should just unplug/un slot.(Somebody else who's done this might know more) Hope this helps. Guy.
|
|
IP Logged |
|
|
|
|