Click to return to main site

Welcome, Guest. Please Login or Register.
Jul 8th, 2024, 10:28pm


Balance: £11.65
Home Home Help Help Search Search Members Members Login Login
Ford Scorpio Forum« Will they fit »
   Ford Scorpio Forum
   General
   Give/Need advice to/from others (Moderators: admin, Highlander, scorpio_man, Simmo, Baz)
   Will they fit		 « Previous topic | Next topic »
Pages: 1  Reply Reply Send Topic Send Topic Print Print
   Author  Topic: Will they fit  (Read 372 times)
dogma
Full Member
***



THE IVE NOT GOT A CLUE MONSTER

   
View Profile Email

Posts: 367
Will they fit
« on: Mar 26th, 2007, 4:49pm »		 Quote Quote Modify Modify
Hi all, does any one know if a set of injectors from a cossie will fit into a 2.9 12 v6,  
many thanks
jim
IP Logged
LIKE MY CAR, WIDE WITH BIG TYRES
Octavian_P
Senior Member
****






  octavian1406@yahoo.com  
View Profile Email

Posts: 1126
Re: Will they fit
« Reply #1 on: Mar 26th, 2007, 5:29pm »		 Quote Quote Modify Modify
Hi there. I afraid not, i just looked in the microcat software and the injectors have different codes so they do not match...
 
Are you having problems with the injectors ? I have manualy cleaned mine on the 2.3.
IP Logged
2.0 16V Ultima|2.3 16V Ghia|2.9 24V Cosworth Ghia
dogma
Full Member
***



THE IVE NOT GOT A CLUE MONSTER

   
View Profile Email

Posts: 367
Re: Will they fit
« Reply #2 on: Mar 26th, 2007, 6:39pm »		 Quote Quote Modify Modify
Ar sod it, a good guy has offered me a set but wont be any good.  I went to the ford site off of this one and they want 660 pound for a new set, how did you clean yours mate, and what did you need after, i,e new seals etc, many thanks
jim
IP Logged
LIKE MY CAR, WIDE WITH BIG TYRES
Octavian_P
Senior Member
****






  octavian1406@yahoo.com  
View Profile Email

Posts: 1126
Re: Will they fit
« Reply #3 on: Mar 26th, 2007, 9:45pm »		 Quote Quote Modify Modify
Well i used some "stone-age" technique. After great care extracting them from the fuel ramp I made a hose that gets over the nozzle of the injector, and connoted it to a syringe. Also in the process i have used a 9V low current transformer power supply. I have filled the syringe with isopropilic alcohol. Applied the voltage to the injector and then pumped the fluid through it. Because you are flushing the injector in the oposit way that it's working all the creep, rust and dirt comes out. Also you could use a can of carb cleaner because it's already pressurized.  
 
WARING WARING WARING WARING WARING WARING WARING WARING WARING WARING WARING WARING WARING WARING

Do not apply voltage to the injector for more than a few seconds (2-3) because it can burn out. I did this to my 2.3 and to my ex car which was a 1.4 Clio engine powerd car. On both time the result was great. Especially on the 1.4 which you could build a small sand castle with the dirt extracted from them. The Scorpio injectors have their own filter mounted to their body (on the 2.3)  
 
Later edit: To check if they are ok. Take a piece of glass / mirror and after you back-flush it shake it a bit then use short bursts of electricity to make it squirt on the glass. If it's only drooling it still needs cleaning. If it makes small atomizations it's OK
IP Logged
2.0 16V Ultima|2.3 16V Ghia|2.9 24V Cosworth Ghia
Pages: 1  Reply Reply Send Topic Send Topic Print Print

« Previous topic | Next topic »

Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1!
YaBB © 2000-2003. All Rights Reserved.