Author |
Topic: Problem whith electric windows (Read 343 times) |
|
sherry
Newbie
I'm a YaBB newbie!
Posts: 16
|
 |
Problem whith electric windows
« on: Jun 24th, 2007, 10:19am » |
 Quote  Modify
|
Hi guys.
Can someone please help me with my electric windows. The problem is that when i press the button to go down or up i have to hold it in till it goes rite down or up. I have tried pressing the window down then holding it again for a second then up again and holding for a second. When i do this to the drivers window, should it program all of them.
|
|
 IP Logged |
|
|
|
pete from Hull
Senior Member
Non Scorpio at the moment, but still interested...
Posts: 1365
|
|
Re: Problem whith electric windows
« Reply #1 on: Jun 24th, 2007, 10:40am » |
Quote Modify
|
I believe that the one shot up feature only works on the drivers window, mine does... someone else might know differently... 
See this http://www.fordscorpio.co.uk/images/handbook060.gif
pete
|
|
IP Logged |
Bring back fair wages.........
|
|
|
sector-9
Senior Member
No scorpio anymore
Posts: 1069
|
|
Re: Problem whith electric windows
« Reply #2 on: Jun 24th, 2007, 11:14am » |
Quote Modify
|
Depends on the age and spec of the car - old or lowly ones like mine only had one-touch down on the driver's window and nothing else.
Darren
|
|
IP Logged |
|
|
|
sherry
Newbie
I'm a YaBB newbie!
Posts: 16
|
|
Re: Problem whith electric windows
« Reply #3 on: Jun 24th, 2007, 11:30am » |
Quote Modify
|
Thanks for your replies guys.
I have tried it again with no joy.
I was wondering if the memory function is conected to the same unit as the seats. Remembered that the guy i bouight it from says the memory function for the seat isnt wired up but could be.
He upgraded the interior with elctric heated seats and didnt wire the memory function as it was only him that drove it.
|
|
IP Logged |
|
|
|
sector-9
Senior Member
No scorpio anymore
Posts: 1069
|
|
Re: Problem whith electric windows
« Reply #4 on: Jun 24th, 2007, 7:31pm » |
Quote Modify
|
It's entirely possible the car doesn't have the hardware needed for one-touch window operation - wiring up the seat memory also needs a newer CCM to support this.
Darren
|
|
IP Logged |
|
|
|
Highlander
Moderator
Expert
13 Scorpios, XR4x4, Suzuki SJ413 for off road :)
Posts: 8244
|
|
Re: Problem whith electric windows
« Reply #5 on: Jun 24th, 2007, 9:42pm » |
Quote Modify
|
One touch up and down is only available on the drivers window, probably for safety reasons?
All mine are like this, including a 98 model
|
|
IP Logged |
on Oct 17th, 2011, 12:35pm, Simmo wrote:I give up !  Too much for an old boy! |
|
|
|
|
Pam and John
Junior Member
A pair of V6's
Posts: 52
|
|
Re: Problem whith electric windows
« Reply #6 on: Jun 24th, 2007, 10:27pm » |
Quote Modify
|
V. strange, just checked ours (R reg Ghia X) and we have one shot opening/closing on all 4 windows - at least from drivers door switches, which agrees with what the handbook says
|
|
IP Logged |
|
|
|
Highlander
Moderator
Expert
13 Scorpios, XR4x4, Suzuki SJ413 for off road :)
Posts: 8244
|
|
Re: Problem whith electric windows
« Reply #7 on: Jun 24th, 2007, 11:03pm » |
Quote Modify
|
Handbook does say passenger window as well as drivers window but none of mine do it even after a reset
|
|
IP Logged |
on Oct 17th, 2011, 12:35pm, Simmo wrote:| I give up ! Too much for an old boy! |
|
|
|
|
harry.m1byt
Full Member
What's YaBB?
Posts: 792
|
|
Re: Problem whith electric windows
« Reply #8 on: Jun 27th, 2007, 10:11pm » |
Quote Modify
|
Mine is a 95 Ultima -
On both the original CCM and a 96 CCM with which I replaced it - I have one touch down on all four windows. I have never been able to get the one touch close to work at all, if it is fitted - though global open and close does work via the key in the lock.
|
|
IP Logged |
August '95 2.9 12v auto Ultima -
Now flashing 
|
|
|
sector-9
Senior Member
No scorpio anymore
Posts: 1069
|
|
Re: Problem whith electric windows
« Reply #9 on: Jun 28th, 2007, 7:58pm » |
Quote Modify
|
Mine's got a 95/96 CCM fitted but my scorp is very early so doesn't have all the modules needed for global closing and the like - in fact the window wiring is pretty much as for any other car. I could add the modules and wire them up to the CCM, but being as it also seems to depend on the CCM settings I don't think I'd gain much. Besides, the back windows are manual anyway!
Darren
|
|
IP Logged |
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print