Author |
Topic: Engine swap 24V-> 16V - Don Quijote on a quest (Read 1329 times) |
|
pappa
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/batman.gif) VM Diesel 2.5Tdi 90kW
Posts: 259
|
![](https://www.fordscorpio.co.uk/YaBBImages/wink.gif) |
Engine swap 24V-> 16V - Don Quijote on a quest
« on: Jul 30th, 2007, 8:08am » |
Quote Modify
|
Hi guys! Thanks for everyone chipping in to my project, the advice I have received have helped me a lot. Now that I'm approaching the finish line, I have started to wonder how am I going to get the O2 sensors working correctly The wiring in the car is based on the Cossie, so the ldownstream O2 sensor (rear) leads went away with the engine+trasmission. I now have only the upstream O2 sensor pugins left. The ECU is -98 model and it may have been modified to ignore the O2 sensors, I don't know, but if not - then I might be in sort of a trouble with them. I think there are two O2 sensors in the 16V engine, one before the CAT and one after. I've been planning on connecting the after CAT sensor into the other upstream sensor plugin and so on and then just see what my OBD scanner tells me. If anyone has experience / knowledge on this one, please feel free to shout it out, thanks!
|
|
IP Logged |
My cars are the best and the pigs and cows fly.
|
|
|
Jonnycab
Senior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](http://i70.photobucket.com/albums/i101/jonnycab/JP_nitrous.gif)
Former owner of 2.3 Ultima Facelift saloon
Posts: 3900
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Engine swap Cossie -> 16V - O2 sensors?
« Reply #1 on: Jul 30th, 2007, 9:26am » |
Quote Modify
|
The 2.3 16V only has the pre-cat sensor I'm not entirely sure, but I think the signal & earth wiring for the after cat sensor is there, but is joined together by a plug Hope this helps
|
|
IP Logged |
|
|
|
pappa
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/batman.gif) VM Diesel 2.5Tdi 90kW
Posts: 259
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Engine swap Cossie -> 16V - O2 sensors?
« Reply #2 on: Jul 30th, 2007, 10:03am » |
Quote Modify
|
Thanks! I'm sure it will help. I'll plug the other O2 sensor with a jump wire and see what happens. I guess the OBD will tell me the rest of story, but I'm really looking forward to starting up the beast.
|
|
IP Logged |
My cars are the best and the pigs and cows fly.
|
|
|
Highlander
Moderator Expert
![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/starmod.gif)
![](http://i1001.photobucket.com/albums/af132/CharlieSloan/Flags/Scotland.gif)
13 Scorpios, XR4x4, Suzuki SJ413 for off road :)
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 8244
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Engine swap Cossie -> 16V - O2 sensors?
« Reply #3 on: Jul 30th, 2007, 7:09pm » |
Quote Modify
|
The missing downstream sensor wont affect the running at all, sounds like you're nearly there
|
|
IP Logged |
![](http://i8.tinypic.com/2qvxssl.gif)
on Oct 17th, 2011, 12:35pm, Simmo wrote:I give up ! Too much for an old boy! |
|
|
|
|
Tompion
Administrator
![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif)
![](http://i.imgur.com/YwLOTZk.jpg)
1997 2.3 Ultima estate.
Posts: 2918
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Engine swap Cossie -> 16V - O2 sensors?
« Reply #4 on: Jul 30th, 2007, 7:14pm » |
Quote Modify
|
I think that wire link is for adjusting the octane setting. My 2.3 has a socket (capped off with a plastic cap) for the sensor tucked up by the gearbox & a blanking plug in the exhaust. Dave
|
|
IP Logged |
ABS multiplug wheel sensor pins MK IV or MK 20
|
|
|
pappa
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/batman.gif) VM Diesel 2.5Tdi 90kW
Posts: 259
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Engine swap Cossie -> 16V - O2 sensors?
« Reply #5 on: Jul 31st, 2007, 6:43am » |
Quote Modify
|
Well yes, I was wondering that plug too - it has only two lead whilst in the O2 sensor has three. It has been quite a task, but yes Highlander, I'm nearly there. About a days work remain and I must go buy some hose, more vacuum pipe, glue (some plastic part were broken during the the transportation & installation process ). Biggest remaining task to do is the exhaust pipes middle part, it has to be re-created. Also the PATS system worries me, there's new ECU in the car, how are they going to act together is beyond my knowledge. But I'm sure someone will then privatly tell me how to override PATS if that fails. Also the fuel injectors may cause trouble, the engine has been built almost ten years ago and has been standing in a stock after that. Well greased, all holes neatly pluggeg and oils in. Stored in house all the time.
|
|
IP Logged |
My cars are the best and the pigs and cows fly.
|
|
|
Kjetil S
Senior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](http://i44.photobucket.com/albums/f41/kskjon/scorpio/avatars/DSC00007-1.jpg)
2001 BMW 520iat
Posts: 1419
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Engine swap Cossie -> 16V - O2 sensors?
« Reply #6 on: Jul 31st, 2007, 2:59pm » |
Quote Modify
|
Re the PATS system. Odds are you'll need to take the car to a main dealer to let them reprogram the PATS system for you, unless you know someone with an FDS2000 or newer
|
|
IP Logged |
http://uncyclopedia.org/wiki/Norway
|
|
|
pappa
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/batman.gif) VM Diesel 2.5Tdi 90kW
Posts: 259
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Engine swap Cossie -> 16V - O2 sensors?
« Reply #7 on: Jul 31st, 2007, 3:18pm » |
Quote Modify
|
on Jul 31st, 2007, 2:59pm, Kjetil S wrote:Re the PATS system. Odds are you'll need to take the car to a main dealer to let them reprogram the PATS system for you, unless you know someone with an FDS2000 or newer |
| Yes that may be the case. But I'm fairly sure that there is a workaround. I'm putting a lot of hope on the ECU. It was meant to be a standalone ECU with no PATS as it's mate. So, if the PATS gives me trouble, it'll get disconnected. And only after all else fails, I will take it to the Ford. I'm sure there is a way to re-route the wiring should PATS immobilize the thing. There is for the Granny, so I'm sure someone has done it on the Scorps as well. We'll see, I will definately post the result. Tonight new hoses and vacuum pipes go in and if all goes well, I may be able to try it out. It'll make a nice sound with no exhaust pipe to muffle it down
|
|
IP Logged |
My cars are the best and the pigs and cows fly.
|
|
|
Kjetil S
Senior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](http://i44.photobucket.com/albums/f41/kskjon/scorpio/avatars/DSC00007-1.jpg)
2001 BMW 520iat
Posts: 1419
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Engine swap Cossie -> 16V - O2 sensors?
« Reply #8 on: Jul 31st, 2007, 5:03pm » |
Quote Modify
|
If that is correct, then it sounds like the PATS link in the ECU has been disabled, and you should probably have no problems at all
|
|
IP Logged |
http://uncyclopedia.org/wiki/Norway
|
|
|
pappa
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/batman.gif) VM Diesel 2.5Tdi 90kW
Posts: 259
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Engine swap Cossie -> 16V - O2 sensors?
« Reply #9 on: Jul 31st, 2007, 7:18pm » |
Quote Modify
|
I SURE Hope so... The engine was supposed to be put into a Volga and I'm not quite sure if they have PATS in those things
|
|
IP Logged |
My cars are the best and the pigs and cows fly.
|
|
|
TiberiuS
Senior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](http://i61.tinypic.com/29w0f81.jpg)
Ex. 1996 2.3 Ultima - RIP P789 KHJ
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 2257
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Engine swap Cossie -> 16V - O2 sensors?
« Reply #10 on: Aug 1st, 2007, 12:35am » |
Quote Modify
|
That's interesting, answers a question for me. A couple of years back I found a plug with two wires which looked like they'd been ripped off. I think it's the one in Jonny's pic but I've no idea why mine had been ripped apart? At the time I was going through the autobox woes and hoped this might explain it...I never did find out what they were for, all I know there was 5v on one and 0v on the other and the car ran happily with them connected Off topic, I think you're on virgin territory converting a 24v to a DOHC but it sounds as though you have it mainly sorted. You'll like the 2.3 lump, you might miss the outright V6 power from your Mk3 but it's compensated with a very smooth revving engine, sounds not unlike a well tuned 6 at high revs, albeit with a bit less growl. Nice engine overall, nice mid power band and at 0 miles I bet it'll be silky Injectors shouldn't be a problem if they're unused, it's the varnish which builds up that makes them stick closed
|
|
IP Logged |
Bruce - '07 Jaguar XKR coupe, '95 Jaguar XJ Sport 4.0, '82 Ford Capri 2.0 Ghia, '15 Honda Civic (sloooooww..)
|
|
|
pappa
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/batman.gif) VM Diesel 2.5Tdi 90kW
Posts: 259
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Engine swap Cossie -> 16V - O2 sensors?
« Reply #11 on: Aug 1st, 2007, 7:49am » |
Quote Modify
|
on Aug 1st, 2007, 12:35am, TiberiuS wrote: Off topic, I think you're on virgin territory converting a 24v to a DOHC but it sounds as though you have it mainly sorted. You'll like the 2.3 lump, you might miss the outright V6 power from your Mk3 but it's compensated with a very smooth revving engine, sounds not unlike a well tuned 6 at high revs, albeit with a bit less growl. Nice engine overall, nice mid power band and at 0 miles I bet it'll be silky Injectors shouldn't be a problem if they're unused, it's the varnish which builds up that makes them stick closed |
| I don't think I PERSONALLY am going to miss the 24V, because I drive the Granny 24V . It's the missus who will have the honor of wondering where did my odd 50bhp disappear . She'll appreciate the near 4 euro per 100km saving in the petrol costs. I estimate that the 24V, with it's leaking EGR & Vacuum pipes vs. Brand new 16V will cut the petrol consumption by 3 litre / 100km and that's 4 euros in Finland! Edit: We drive around 20thousand km with that car per year, so it is about 800 euros saving per year. If it lasts for two years without major problems, it has paid itself back.
|
|
IP Logged |
My cars are the best and the pigs and cows fly.
|
|
|
pappa
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/batman.gif) VM Diesel 2.5Tdi 90kW
Posts: 259
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Engine swap Cossie -> 16V - O2 sensors?
« Reply #12 on: Aug 4th, 2007, 12:56pm » |
Quote Modify
|
on Jul 31st, 2007, 5:03pm, Kjetil S wrote:If that is correct, then it sounds like the PATS link in the ECU has been disabled, and you should probably have no problems at all |
| Yehaa! I have had millions of problems and still continue to have them. Most of them are mechanical problems, but today I finally got electricity into the lump and into the whole system. Decided to give it shot, to turn the engine a few rounds. But, the PATS is doing it's marvellous job. I get 1:6 flashes from the PATS led - Faulty link betveen PATS & ECU. Will try again after removing the PATS module, but I'm sure it's a Go To The Nearest Ford and pay a sickening amount of currency for them. I also may try to override the system after removing the PATS module - and if that fails, then it's FORD time
|
|
IP Logged |
My cars are the best and the pigs and cows fly.
|
|
|
pappa
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/batman.gif) VM Diesel 2.5Tdi 90kW
Posts: 259
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Engine swap Cossie -> 16V - O2 sensors?
« Reply #13 on: Aug 10th, 2007, 6:00am » |
Quote Modify
|
on Jul 31st, 2007, 6:43am, pappa wrote:Biggest remaining task to do is the exhaust pipes middle part, it has to be re-created. Also the PATS system worries me, there's new ECU in the car, how are they going to act together is beyond my knowledge. But I'm sure someone will then privatly tell me how to override PATS if that fails. |
| Boy was I wrong... The biggest remaining task has not been the exhaust, it's the wiring. Stupid me, I should have taken a closer look on the wiring scheme BEFORE starting this project. Last night, after swapping the fusebox into a new one, which seems the same (I lost all interior lights and door lights with it) I started cutting & pasting wiring schemas together in order to find out how to get the beast started. Well... it all ends in the connector c113 (in 24V) / c112 (in 16v) which is the brown one in the engine room. If I remember correctly. Well... there's only one wire that is in a same place in 24v and in 16v. My eyes may be grossed already, but this is what I have come up with. And some wires are missing or are totally different. I will sort them out and after that it's overriding the PATS..
|
|
IP Logged |
My cars are the best and the pigs and cows fly.
|
|
|
pappa
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/batman.gif) VM Diesel 2.5Tdi 90kW
Posts: 259
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Engine swap 24V-> 16V - Don Quijote on a qu
« Reply #14 on: Aug 17th, 2007, 4:41pm » |
Quote Modify
|
HALLELUJAH! THE BLOODY THING IS RUNNING! With a new wiring loom and a quite a lot of work it is finally running. Heck'u'va lousy idle though, and makes funny noises every now and then, but it is working! Will sort these out for sure. I Will go on rebuilding the rest of the car and fixing things that were not done properly the first time etc. Hoping to get the car ready during the weekend! Millions of thanks to this site and who have chipped in to the project.
|
|
IP Logged |
My cars are the best and the pigs and cows fly.
|
|
|
scorpio_man
Administrator
![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif)
![](http://img.photobucket.com/albums/v521/scorpio_man/scotland_royal_banner_fl_md_clr.gif)
Ford Kuga awd
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 5654
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Engine swap 24V-> 16V - Don Quijote on a qu
« Reply #15 on: Aug 17th, 2007, 6:29pm » |
Quote Modify
|
good news!! keep with it. regards forum admin team
|
|
IP Logged |
|
|
|
pappa
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/batman.gif) VM Diesel 2.5Tdi 90kW
Posts: 259
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Engine swap 24V-> 16V - Don Quijote on a quest
« Reply #16 on: Aug 20th, 2007, 5:11am » |
Quote Modify
|
Yippeee. It is indeed working and the lousy idle, guess what, right from the brand new beginning the EGR is leaking!! And it is factory built brand new. Well I thought I would plug it anyway to prevent it from messing up the system in the future. It's been a lot of work I tell you. The wiring loom for the engine includes even the ABS sensor cable, all the way to the under the backseat. So I have had to dismantle the dash and half of the interior on the RD side of the car. Now trying to put it all back together. Did a Battery junction fusebox mod while I was at it. It is now INSIDE the car, not there under the waterfall in the engine room. And it is almost brandnew as well. Downside is now that is there's no PATS. But then there's also NO need for key with a transponder, so I can have about 67 spare keys to go with it Speedo is not showing rpm and also the computer display is "dead". So I need a new 2.3 DOHC speedo system. Open to offers (including shipping to finland silent ) in exchange I'm offering a type 10 Cossie speedo.
|
|
IP Logged |
My cars are the best and the pigs and cows fly.
|
|
|
pappa
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/batman.gif) VM Diesel 2.5Tdi 90kW
Posts: 259
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Engine swap 24V-> 16V - Don Quijote on a qu
« Reply #17 on: Sep 5th, 2007, 8:40am » |
Quote Modify
|
Hi! Did a virgin voyage with the car yesterday. Around 1000km with it and "No Problemos". Well, many things to sort out though, some easy, some more challenging. The Speedo needs to be changed for sure, the rpm is showing around 200-300 less than it truly is, speed display is incorrect, showing around 7km/h less than it should etc. etc. The front stabilizer bar needs to be changed/modified, it is in contact with the engine bottom at the moment (it's from the original 24V). The VSS is probably wrong/in the wrong place / has a wrong "screw" in it. It's the main suspect of the extremely ugly gearchange. I also managed to break one of the ABS sensors when I changed the front wheel bearing, so that needs to be fixed. I did a fusebox mod to the battery junction fusebox. It is now inside the car on top of the glove department. When my dash was off I removed some metal holders for the relays that were there and re-routed the fusebox leads so that I could fit it inside. Now when I open the glove department and the hatch in it, I see the battery junction fusebox in it! No more water ingress on it! So some work remains, but the engine itself is now working nicely. Did a quick OBDII scan on it, no DTC's to clear out, but I'm a bit puzzled with the readings from the HO2 sensors. There's now only one, but in the reading also the number 2 sensor appeared. I wonder if the ECU is trying to adjust the mixture based on the values it gets from two HO2 sensors... I may have to add that later on, but I think it should not matter. I'll keep on posting.
|
|
IP Logged |
My cars are the best and the pigs and cows fly.
|
|
|
Tompion
Administrator
![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif)
![](http://i.imgur.com/YwLOTZk.jpg)
1997 2.3 Ultima estate.
Posts: 2918
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Engine swap 24V-> 16V - Don Quijote on a qu
« Reply #18 on: Sep 5th, 2007, 9:32am » |
Quote Modify
|
I think mine shows non-existing HO2 sensor as well.
|
|
IP Logged |
ABS multiplug wheel sensor pins MK IV or MK 20
|
|
|
|