Author |
Topic: cossie fuel question (Read 306 times) |
|
solarpanel
Full Member
I love YaBB 1G - SP1!
Posts: 551
|
 |
cossie fuel question
« on: Aug 8th, 2007, 9:41pm » |
 Quote  Modify
|
after the hose that goes through the block split and it dumped the water out,the engine started after repair but it rumbles at about 3k rpm,so ive fitted the ex plod engine i had kept [goes better]but ive notice that the lph rate is 1.5/1.7/1.9 when warm.......so what does you cossie run at.....solarpanel
|
|
 IP Logged |
|
|
|
Matt
Senior Member
Manual'd and a 4.0 in the making
Posts: 2816
|
|
Re: cossie fuel question
« Reply #1 on: Aug 8th, 2007, 10:26pm » |
Quote Modify
|
i take it you mean at idle,
they should run at just below 1000 rpm (limited to reduce a strong creep with the autobox)
|
|
IP Logged |
 
FDS2000 Scans - Birmingham
|
|
|
solarpanel
Full Member
I love YaBB 1G - SP1!
Posts: 551
|
|
Re: cossie fuel question
« Reply #2 on: Aug 9th, 2007, 9:23am » |
Quote Modify
|
not rpm.....litres per hour at idle its using 1.5/1.9.......if you turn the mode to kph/litres etc you can see lph rate.....it idles at 800
|
|
IP Logged |
|
|
|
Highlander
Moderator
Expert
13 Scorpios, XR4x4, Suzuki SJ413 for off road :)
Posts: 8244
|
|
Re: cossie fuel question
« Reply #3 on: Aug 9th, 2007, 9:33am » |
Quote Modify
|
mine idles just below 700rpm specs say it should be 730 in N 650 in D
|
|
IP Logged |
on Oct 17th, 2011, 12:35pm, Simmo wrote:I give up !  Too much for an old boy!  |
|
|
|
|
Octavian_P
Senior Member
 
Posts: 1126
|
|
Re: cossie fuel question
« Reply #4 on: Aug 9th, 2007, 2:20pm » |
Quote Modify
|
When my cossie was running it took about 1.2-1.5 when in N and 1.5 to 2 when in D. The values depend on the temperature.
|
|
IP Logged |
2.0 16V Ultima|2.3 16V Ghia|2.9 24V Cosworth Ghia
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print