Author |
Topic: 24V REMAP CHIP (Read 1136 times) |
|
dan_the_man
Full Member
I'm a YaBB newbie!
Posts: 314
|
 |
24V REMAP CHIP
« on: Oct 8th, 2007, 10:00pm » |
 Quote  Modify
|
DOES ANYONE KNOW A GREAT REMAP CHIP TO GO FOR ? OR WHERE A SECOND HAND ONE MAY LURK ? CHEERS.
|
|
 IP Logged |
|
|
|
Tons_of_fun
Full Member
Mmmm...Xena !
Posts: 978
|
|
Re: 24V REMAP CHIP
« Reply #1 on: Oct 8th, 2007, 10:36pm » |
Quote Modify
|
Evening dan.The ONLY company i would trust for re maps is superchips.They arent the cheapest (Around £270),but that said you are guarenteed results.Had my 12v done & it is far more responsive,especially around the 2000-5000 rpm mark.There are cheaper alternative companies but as the old saying goes....You only get what you pay for.
|
|
IP Logged |
Lord...Sometimes im not that bright
|
|
|
amigafan2003
Full Member
I'm a YaBB newbie!
Posts: 972
|
|
Re: 24V REMAP CHIP
« Reply #2 on: Oct 9th, 2007, 8:32am » |
Quote Modify
|
Had mine done at Motorsport Developments which are a 5min walk from where i live.
Chipped my Cossie and had it rolling roaded before and after - 209bhp before - 226bhp after - so actually made a little more than they quoted in the end - I do have an uprated panel filter and brand new plugs/leads and a stainles cat back exhaust system as well though.
|
|
IP Logged |
|
|
|
dan_the_man
Full Member
I'm a YaBB newbie!
Posts: 314
|
|
Re: 24V REMAP CHIP
« Reply #3 on: Oct 9th, 2007, 8:54am » |
Quote Modify
|
thanks folks, I have contacted both companys, and a couple of other ones also.
|
|
IP Logged |
|
|
|
Matt
Senior Member
Manual'd and a 4.0 in the making
Posts: 2816
|
|
Re: 24V REMAP CHIP
« Reply #4 on: Oct 9th, 2007, 6:30pm » |
Quote Modify
|
20bhp gain is about right for a cossie's remap chip, the 24v lump it already pretty well tuned,
if you want to up the acceleration a bit, consider fitting the 2.0l diff (you'll also need to fit the 2.0l VSS)
having it de-cat'd will also help it breath and give you more power
|
|
IP Logged |
 
FDS2000 Scans - Birmingham
|
|
|
dan_the_man
Full Member
I'm a YaBB newbie!
Posts: 314
|
|
Re: 24V REMAP CHIP
« Reply #5 on: Oct 10th, 2007, 12:26am » |
Quote Modify
|
cheers Mat the cat's are out, I fitted a fancy induction system also. I hope I am already at 220 bhp the 2L diff is a sweet idea . it is an estate but I can 0-60 at 8.5 at the moment, I would love to rolling road test her.
|
|
IP Logged |
|
|
|
Highlander
Moderator
Expert
13 Scorpios, XR4x4, Suzuki SJ413 for off road :)
Posts: 8244
|
|
Re: 24V REMAP CHIP
« Reply #6 on: Oct 10th, 2007, 10:32am » |
Quote Modify
|
I have the 2 litre 4.27 diff fitted, 0-60 around the 6 second mark but dont use it on the motorway for a long journey or you'll need to plan the route around petrol stations 
|
|
IP Logged |
on Oct 17th, 2011, 12:35pm, Simmo wrote:I give up !  Too much for an old boy!  |
|
|
|
|
Matt
Senior Member
Manual'd and a 4.0 in the making
Posts: 2816
|
|
Re: 24V REMAP CHIP
« Reply #7 on: Oct 10th, 2007, 6:48pm » |
Quote Modify
|
you drive a cossie and dont do that anyway
im shocked  
|
|
IP Logged |
FDS2000 Scans - Birmingham
|
|
|
Tobbe
Junior Member
4.1 litre 24v BOB
 
Posts: 93
|
|
Re: 24V REMAP CHIP
« Reply #8 on: Oct 11th, 2007, 9:28pm » |
Quote Modify
|
226bhp, not bad, not bad at all Do you got any chart from the rollers?
|
|
IP Logged |
|
|
|
Tons_of_fun
Full Member
Mmmm...Xena !
Posts: 978
|
|
Re: 24V REMAP CHIP
« Reply #9 on: Oct 11th, 2007, 10:03pm » |
Quote Modify
|
I like the idea of fitting a 2.0l diff.Any idea if this will work on a 12vDoes it really lift the revs in top gear currently my 12v is around 2750 rpm @ 70 mph,& going from memory my old 2.0l was about 3200 rpm at the same speed.Cheers ...Craig 
|
|
IP Logged |
Lord...Sometimes im not that bright
|
|
|
amigafan2003
Full Member
I'm a YaBB newbie!
Posts: 972
|
|
Re: 24V REMAP CHIP
« Reply #10 on: Oct 12th, 2007, 3:07pm » |
Quote Modify
|
Quote:| 226bhp, not bad, not bad at all Wink Do you got any chart from the rollers? |
|
I have, I'll scan it tonight when I get home.
|
|
IP Logged |
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print