Author |
Topic: matrixmoany (Read 346 times) |
|
eau_de_cologne
Newbie
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/xena.gif) old but interesting
Posts: 26
|
My heater matrix don't work so I will flush it out, would sombody let which upper and lower pipes through the bulkhead inlet and outlet.
|
|
IP Logged |
|
|
|
Jonnycab
Senior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](http://i70.photobucket.com/albums/i101/jonnycab/JP_nitrous.gif)
Former owner of 2.3 Ultima Facelift saloon
Posts: 3900
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: matrixmoany
« Reply #1 on: Feb 9th, 2008, 7:11pm » |
Quote Modify
|
Hi there, the matrix inlet pipe runs from the inlet manifold & the outlet pipe goes back into the engine block, just behind the water pump. Well on a 2.0 & 2.3 it does, not sure about the cossie or diesel ? Hope this helps
|
|
IP Logged |
|
|
|
|