Author |
Topic: how clean (Read 412 times) |
|
vosper
Newbie
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif) I'm a YaBB newbie!
Posts: 15
|
HI Trying to get abs light off, i think the rears are at fault, I get 1 volt from front sensors when i spin the weel. Cannot spin back one's fast to get a reading. How clean should the ring be, ie remove all rust and should it be shiney. Thanks Vosper
|
|
IP Logged |
|
|
|
PeteB
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](http://www.rbowley.plus.com/scorptd.jpg)
2.0 16v Ultima Saloon RIP \ 2.5 TD Ultima Saloon
Posts: 229
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: how clean
« Reply #1 on: Feb 18th, 2008, 8:59pm » |
Quote Modify
|
It may be its simply failed, I'd take it to someone that can do a scan and read the fault code. Thats what I ened up doing saved me alot of time! Pete
|
|
IP Logged |
|
|
|
Tompion
Administrator
![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif)
![](http://i.imgur.com/YwLOTZk.jpg)
1997 2.3 Ultima estate.
Posts: 2918
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: how clean
« Reply #2 on: Feb 18th, 2008, 10:44pm » |
Quote Modify
|
The sensor rings just need to be free from debris surface rust doesn't matter, don't need to be shiny
|
|
IP Logged |
ABS multiplug wheel sensor pins MK IV or MK 20
|
|
|
scruffygyt
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/dog.gif) I'm a YaBB newbie!
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 129
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: how clean
« Reply #3 on: Feb 18th, 2008, 10:57pm » |
Quote Modify
|
i had the abs light come on when i first got mine, took wheels off and gave everything a good clean and sprayed whith WD including conectors under rear seats been fine since.
|
|
IP Logged |
98 24v ultima (facelift) now sold & missing it
|
|
|
vosper
Newbie
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif) I'm a YaBB newbie!
Posts: 15
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: how clean
« Reply #4 on: Feb 18th, 2008, 11:12pm » |
Quote Modify
|
I Have done all that, next pump its self, should you be able too feel the pump runing, I have got obd I and II software will that be of use for my 12v 2.9 1996 scorpio, Thanks Vosper
|
|
IP Logged |
|
|
|
harry.m1byt
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif) What's YaBB?
Posts: 792
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: how clean
« Reply #5 on: Feb 18th, 2008, 11:20pm » |
Quote Modify
|
None loose surface coating of rust and none metallic dirt will not be a problem, but larger chunks of loose rust and metal fillings around/between the cogs will be. It only needs to have one cog so choked and failing to generate a volage pulse, to trigger an ABS fault. The 1v only really confirms that the sensor is working as it should, it doesn't confirm that the pulses are all occuring as each cog passes the sensor. Confirming that needs a means to turn the wheel at a regular rotation speed and some means to watch the actual pulses oscilloscope or a missing pulse detector.
|
|
IP Logged |
August '95 2.9 12v auto Ultima - Now flashing
|
|
|
|