Click to return to main site

Welcome, Guest. Please Login or Register.
Jul 8th, 2024, 5:21pm


Balance: £11.65
Home Home Help Help Search Search Members Members Login Login
Ford Scorpio Forum« Remote, one cell or two! »
   Ford Scorpio Forum
   General
   Give/Need advice to/from others
(Moderators: admin, Highlander, scorpio_man, Simmo, Baz)
   Remote, one cell or two!
« Previous topic | Next topic »
Pages: 1  Reply Reply Send Topic Send Topic Print Print
   Author  Topic: Remote, one cell or two!  (Read 511 times)
harry.m1byt
Full Member
***



What's YaBB?

   
View Profile

Posts: 792
Remote, one cell or two!
« on: Feb 20th, 2008, 10:05pm »
Quote Quote Modify Modify

Hi all,
 
Some while ago, a few of you were discussing the remote and had found it works well with just one cell, a 2032 - rather than the 2x 2016's suggested in the handbook - both cell types are 3v. The difference being a single cell providing the remote with just 3v and the 2x in series with 6v.
 
Well....
 
Over in the email forum a debate has been going on about this and one individual suggests his remote - bought new from Ford a few years ago for the Scopio in a sealed package, had just one 2032 fitted, hence 3 volt.
 
Now, could it be that the remote was actually designed from the start to be compatible with either 3v or 6v, hence the reason why some of you find it works with a single 2032 installed.
 
A single 2032 will be quite a bit cheaper than 2x 2016's, has more capacity than 2x 2016's and because of the lower voltage - would probably last quite a lot longer anyway. The single cell is also much less fidley to fit and no risk of the spring at the side shorting out the two cells.  
 
Yet another Scopio curiosity!
 
Has anyone else bought a new remote recently and found just one cell inside?
 
IP Logged

August '95 2.9 12v auto Ultima -
Now flashing Smiley
Daven
Senior Member
****




I'm a cheeky Boy! (Simmos fan club)

   
View Profile WWW

Posts: 1117
Re: Remote, one cell or two!
« Reply #1 on: Feb 21st, 2008, 10:51am »
Quote Quote Modify Modify

on Feb 20th, 2008, 10:05pm, harry.m1byt wrote:
d one individual suggests his remote - bought new from Ford a few years ago for the Scopio in a sealed package, had just one 2032 fitted, hence 3 volt.
 
 

 
That would be me then! Tongue
 
It appears some recently purchased brand new remotes were supplied with two batteries and some with 1 - I would suggest replacing type for type!
 
I am not going to try 6v in my remote as it cost £70 I aint going to experiment with it!
 
Dave
IP Logged
harry.m1byt
Full Member
***



What's YaBB?

   
View Profile

Posts: 792
Re: Remote, one cell or two!
« Reply #2 on: Feb 21st, 2008, 5:38pm »
Quote Quote Modify Modify

I'm not suggesting you do risk it on 6v - however if the design of your remote limited it to 3v batteries only, I would have expected Mr Ford to supply it along with an ammendment page to replace the page in the cars manual.
 
IP Logged

August '95 2.9 12v auto Ultima -
Now flashing Smiley
Pages: 1  Reply Reply Send Topic Send Topic Print Print

« Previous topic | Next topic »

Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1!
YaBB © 2000-2003. All Rights Reserved.