Author |
Topic: maf (Read 921 times) |
|
deconick
Junior Member
I'm a YaBB newbie!
Posts: 100
|
hi could anyone point me in the right direction as to where to buy a new mass airflow sensor.cheers
|
|
 IP Logged |
|
|
|
Highlander
Moderator
Expert
13 Scorpios, XR4x4, Suzuki SJ413 for off road :)
Posts: 8244
|
 |
Re: maf
« Reply #1 on: Oct 14th, 2008, 7:54pm » |
 Quote  Modify
|
Any Ford dealer or www.fordpartsuk.com but i'm pretty sure they are £100 plus, grab a good second hand one
|
|
IP Logged |
on Oct 17th, 2011, 12:35pm, Simmo wrote:I give up !  Too much for an old boy!  |
|
|
|
|
deconick
Junior Member
I'm a YaBB newbie!
Posts: 100
|
|
Re: maf
« Reply #2 on: Oct 14th, 2008, 7:59pm » |
Quote Modify
|
cheers mate
|
|
IP Logged |
|
|
|
Highlander
Moderator
Expert
13 Scorpios, XR4x4, Suzuki SJ413 for off road :)
Posts: 8244
|
|
Re: maf
« Reply #3 on: Oct 14th, 2008, 8:00pm » |
Quote Modify
|
What engine is it for?
|
|
IP Logged |
on Oct 17th, 2011, 12:35pm, Simmo wrote:| I give up ! Too much for an old boy! |
|
|
|
|
deconick
Junior Member
I'm a YaBB newbie!
Posts: 100
|
|
Re: maf
« Reply #4 on: Oct 14th, 2008, 8:16pm » |
Quote Modify
|
2.9 cosworth 24v- year 1995
|
|
IP Logged |
|
|
|
gozz
Senior Member
Been around awhile
Posts: 3475
|
|
Re: maf
« Reply #5 on: Oct 14th, 2008, 8:19pm » |
Quote Modify
|
deconick.
I got one for a 2.3 from Ebay,new pattern part for about £40.Scour the Scorpio parts,they are nearly always on there.If I come across the name I will let you know.Incidentally it did work.
GOZZ
|
|
IP Logged |
|
|
|
scorpio_man
Administrator
Ford Kuga awd
Posts: 5654
|
|
Re: maf
« Reply #6 on: Oct 14th, 2008, 8:24pm » |
Quote Modify
|
hi there
for reference, the 2.9 24v MAF is different. it bolts on and is, i think, a bit larger.
hth
|
|
IP Logged |
|
|
|
gozz
Senior Member
Been around awhile
Posts: 3475
|
|
Re: maf
« Reply #7 on: Oct 14th, 2008, 8:30pm » |
Quote Modify
|
scorpio_man.
That's right,the 2.3 one fits the Galaxy as well,so is obviously popular just now,but the Cossie is indeed a seperate animal,a pity that !
GOZZ.
|
|
IP Logged |
|
|
|
deconick
Junior Member
I'm a YaBB newbie!
Posts: 100
|
|
Re: maf
« Reply #8 on: Oct 14th, 2008, 8:51pm » |
Quote Modify
|
cheers gozz & scorpio man, so its got to be the right one or are they the same but with different fittings
|
|
IP Logged |
|
|
|
gozz
Senior Member
Been around awhile
Posts: 3475
|
|
Re: maf
« Reply #9 on: Oct 14th, 2008, 9:08pm » |
Quote Modify
|
deconick.
Unfortunately not,as scorpio man says the 2.9 is definitely bigger,because the Cossie needs bags of wind ! Does it have to be new ? there are a fair few used ones about,no doubt Highlander has a dedicated 24v MAF shelf 
GOZZ.
|
|
IP Logged |
|
|
|
deconick
Junior Member
I'm a YaBB newbie!
Posts: 100
|
|
Re: maf
« Reply #10 on: Oct 14th, 2008, 9:19pm » |
Quote Modify
|
yeah your right maybe that a second hand will do cheaper the better,cos im still trying to cure this o/d flashing light problem,ive done the auto box fluid flush and filter change but light still comes on
|
|
IP Logged |
|
|
|
Highlander
Moderator
Expert
13 Scorpios, XR4x4, Suzuki SJ413 for off road :)
Posts: 8244
|
|
Re: maf
« Reply #11 on: Oct 15th, 2008, 12:49am » |
Quote Modify
|
is the OD light flashing constantly?
|
|
IP Logged |
on Oct 17th, 2011, 12:35pm, Simmo wrote:| I give up ! Too much for an old boy! |
|
|
|
|
martin_rowe
Full Member
I love YaBB 1G - SP1!
Posts: 879
|
|
Re: maf
« Reply #12 on: Oct 15th, 2008, 8:37am » |
Quote Modify
|
New MAF for 24v is very expensive circ £175 as they only fit that vehicle, have a couple of sh ones if you are interested.
|
|
IP Logged |
Rally Drivers Do It Sideways
|
|
|
deconick
Junior Member
I'm a YaBB newbie!
Posts: 100
|
|
Re: maf
« Reply #13 on: Oct 15th, 2008, 5:16pm » |
Quote Modify
|
hi chaps the o/d light flashes somtimes also runs a bit sluggish sometimes and othertimes goes like a bat out of hell so i dont know.
|
|
IP Logged |
|
|
|
deconick
Junior Member
I'm a YaBB newbie!
Posts: 100
|
|
Re: maf
« Reply #14 on: Oct 15th, 2008, 5:20pm » |
Quote Modify
|
oh when the o/d light flashes i just pull over and switch of the engine and start again then off we go every thing ok
|
|
IP Logged |
|
|
|
Jonnycab
Senior Member
Former owner of 2.3 Ultima Facelift saloon
Posts: 3900
|
|
Re: maf
« Reply #15 on: Oct 16th, 2008, 3:23am » |
Quote Modify
|
Seeing as the O/D light is illuminated by the PCM because it detects an error, could it be that the PCM is causing the car to go sluggish because it has received an error code from the fully electronic autobox ?
It's all here.......http://www.fordscorpio.co.uk/odlight.htm
Or it could actually be a fault in the PCM  .......I seem to remember reading that Ford do have there fair share of problematic engine management modules & the Scorpio PCMs were no exception 
|
|
IP Logged |
|
|
|
deconick
Junior Member
I'm a YaBB newbie!
Posts: 100
|
|
Re: maf
« Reply #16 on: Oct 16th, 2008, 6:11pm » |
Quote Modify
|
well chaps today i unplugged the maf and drove my the usual way to work and the o/d light did not flash at all,gear change was smoother too, plus cleaned maf with carbclean but the two wires stay dull not nice and shinny so i will be off to get a new maf at a small cost of £110.or i might try one of another car if so will let you all know my results,cheers for all the responce its good to talk
|
|
IP Logged |
|
|
|
deconick
Junior Member
I'm a YaBB newbie!
Posts: 100
|
|
Re: maf
« Reply #17 on: Oct 17th, 2008, 6:20pm » |
Quote Modify
|
well plugged the maff back in today and we had o/d flashing lumpy gear change plus put your foot down lots of revs not much power at the wheels also lost 4th gear again,unplugged the maff smooth drive home of to get new maff tomorrow, this part has a lot of influence over the whole engine, so i should have a sweet running v6 cossie power machine again soon.
|
|
IP Logged |
|
|
|
deconick
Junior Member
I'm a YaBB newbie!
Posts: 100
|
|
Re: maf
« Reply #18 on: Oct 23rd, 2008, 5:35pm » |
Quote Modify
|
ok peoples good news fitted new maff on monday and the o/d light has not flashed gear change smooth and the engine sounds and runs better,also fitted new air filter and put engine breather pipe to atmosphere with it own small filter also got inlet tube of a 2.3 scorp so i now have a cold air induction kit on the cheap  
|
|
IP Logged |
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print