Author |
Topic: Disaster....... (Read 770 times) |
|
Hovis
Newbie
Posts: 11
|
 |
Disaster.......
« on: Feb 16th, 2009, 1:27pm » |
 Quote  Modify
|
Its finished before it even really got started 
I collected the Scop on Saturday at 12:30 it was back at the garage and dead by 3
I'll try to keep this as short as possible. I picked it up and took it to the fuel station and stuck £25 in it and decided it would be nice to wash it. Within 5mins of leaving the car wash i was in trouble! First I lost all the dash lights then some would come on when i was indicating, braking etc! Then the engine started to run badly....like the turbo had packed up! Finally the dials stopped working! I then made the wise decision to switch it off facing up the hill in front of the drive with a tree 4ft behind me!! I'm sure many of you have guessed that the drain holes were blocked and that the ecu was what could be described as a little damp!! With some effort we managed to bump it in reverse, it was then we found the head was leaking water! I phoned my mate at the garage and said i was bringing it back as it was rougher than i was expecting. When i arrived back 10mins later he started having a poke and prod at the electrics, then it over heated in spectacular fashion the header tank blew and a fountain of red hot water fired out hit the bonnet and sprayed everywhere!!! We did the manly thing.....screamed and ran away!!
I'm sooooo disappointed, I only drove it a few miles and I was extremely impressed!!! Electric everything and it all worked and it did go alright too!
So now there is two questions 1) Does anyone need any parts for a 1995 2.5td?, and 2) Has anyone got one (it can be rough) they want to get rid of? I want one!!!
|
|
 IP Logged |
|
|
|
wumpster
Full Member
1996 2.5TD Scorpio Exec
 
Posts: 155
|
|
Re: Disaster.......
« Reply #1 on: Feb 16th, 2009, 1:38pm » |
Quote Modify
|
i could do with a drive belt tensioner and damper there was a couple on flea bay m8 not fetching a lot its a shame the ecu has gone m8 the head gaskets are not a bad job to do on the TD could you not get another ecu for it
|
|
IP Logged |
www.thewumpster.co.uk
|
|
|
Hovis
Newbie
Posts: 11
|
|
Re: Disaster.......
« Reply #2 on: Feb 17th, 2009, 9:18am » |
Quote Modify
|
I don't know if the ECU would be ok when it dried out but the engine got extremely hot so I'd be daft not to get the head skimmed, the costs and time would soon start mounting up.
It's a shame, it would have been nice to do the rally in some comfort for a change!
Where abouts are you wumpster?
|
|
IP Logged |
|
|
|
wumpster
Full Member
1996 2.5TD Scorpio Exec
Posts: 155
|
|
Re: Disaster.......
« Reply #3 on: Feb 17th, 2009, 7:28pm » |
Quote Modify
|
i am in northwich cheshire m8
|
|
IP Logged |
www.thewumpster.co.uk
|
|
|
pinto
Full Member
TD04 on a galaxy manifold ? whooooooosh !
Posts: 474
|
|
Re: Disaster.......
« Reply #4 on: Feb 17th, 2009, 9:41pm » |
Quote Modify
|
The heads arent usually too expensive to get hold of complete - they fitted them to Rovers, Jeeps, Range Rovers, etc....
I'd perservere for a little while before giving up the ghost 
|
|
IP Logged |
|
|
|
Highlander
Moderator
Expert
13 Scorpios, XR4x4, Suzuki SJ413 for off road :)
Posts: 8244
|
|
Re: Disaster.......
« Reply #5 on: Feb 18th, 2009, 9:30pm » |
Quote Modify
|
I'm after an alternator if you break it
|
|
IP Logged |
on Oct 17th, 2011, 12:35pm, Simmo wrote:I give up !  Too much for an old boy!  |
|
|
|
|
k1ng_james
Newbie
I'm a YaBB newbie!
Posts: 19
|
|
Re: Disaster.......
« Reply #6 on: Feb 20th, 2009, 8:25pm » |
Quote Modify
|
Im after a rear bumper. yours looks like its mallard green too!
|
|
IP Logged |
|
|
|
bigmumf
Newbie
2.3 16v Ultima
Posts: 24
|
|
Re: Disaster.......
« Reply #7 on: Apr 11th, 2009, 5:17pm » |
Quote Modify
|
I don't want to appear to jump on the doom & gloom band wagon  , but if you do scrap her, I don't suppose you've got a Locking Nut Key?
Big Mumf
|
|
IP Logged |
Through adversity comes triumph...
|
|
|
lesterlad aka Rodders
Full Member
2.3 Ghia x Estate (Manual)
Posts: 877
|
|
Re: Disaster.......
« Reply #8 on: Apr 11th, 2009, 11:44pm » |
Quote Modify
|
on Apr 11th, 2009, 5:17pm, bigmumf wrote:I don't want to appear to jump on the doom & gloom band wagon , but if you do scrap her, I don't suppose you've got a Locking Nut Key?
Big Mumf
|
|
If he has I very much doubt it will match your lock nuts, there are 100's if not 1000's of different combination's
|
|
IP Logged |
There's are methods to my madness!!! I'm not sure what the methods are but there's definitely madness in them
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print