Author |
Topic: Distributor Cap and Rotor Arm (Read 509 times) |
|
TomP
Junior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif) I'm a YaBB newbie!
Posts: 67
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Distributor Cap and Rotor Arm
« on: Feb 25th, 2009, 12:42pm » |
Quote Modify
|
Is there a service interval for replacing the Distributor Cap and Rotor Arm on a 2.9 12V Scorpio? I'm going through the service schedule and taken off the cap and arm. Not really sure how to tell if they need replacing. There is some silver/grey residue on both the tip of the Arm and also on the contact points inside the Cap. Been quoted £19.36 and £8.72 +VAT by local Ford dealer for parts but don't want to change unless necessary. Thanks.
|
|
IP Logged |
|
|
|
joe-satch
Senior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif) joe satriani is the best guitarist in the world.
Posts: 1161
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Distributor Cap and Rotor Arm
« Reply #1 on: Feb 25th, 2009, 5:06pm » |
Quote Modify
|
hi tomp. i change mine (mk3) every year...if the contact segments within the cap are pitted,and the rotor arm looks worn,change them..or if only for piece of mined,but i dont pay ford prices...i go to my local A1 MOTOR STORE....never had any problems with non ford parts anyway. .regards den. .
|
|
IP Logged |
|
|
|
|