Author |
Topic: Ultima heater matrix replacement (Read 617 times) |
|
Malcolm73
Full Member
Posts: 137
|
 |
Ultima heater matrix replacement
« on: Mar 26th, 2009, 10:17pm » |
 Quote  Modify
|
My car is a 24v Ultima, first registered April 1997. The heater matrix is probably leaking and a local garage who undertakes air con’ work will replace the matrix next Wednesday.
The fan occasionally stops, showing two - - on the display, also there is occasionally a sound, as if a leaf is hitting the fan.
I believe the garage, near Dudley to be competent but are there any major differences between the climate controls on the Scorpio compared with other makes of car?
Are there any other jobs worth considering whilst the car is in pieces? All panel bulbs seem to be operational.
Malcolm 73
|
|
 IP Logged |
|
|
|
gozz
Senior Member
Been around awhile
Posts: 3475
|
|
Re: Ultima heater matrix replacement
« Reply #1 on: Mar 26th, 2009, 10:35pm » |
Quote Modify
|
Malcolm.
Make sure the aircon drains are clear (if it's been on) taste the leakage for coolant assuming you have antifreeze in it ! Is the clock lamp OK,they sometimes get overlooked.The matrix replacement is a long,and if carried out commercially,expensive job.
GOZZ.
|
|
IP Logged |
|
|
|
scorpio_man
Administrator
Ford Kuga awd
Posts: 5654
|
|
Re: Ultima heater matrix replacement
« Reply #2 on: Mar 27th, 2009, 1:35pm » |
Quote Modify
|
hi there
also make sure the replacement matrix is for a scorpio with climate control.
the a/c only and granada versions are smaller.
hth
|
|
IP Logged |
|
|
|
Malcolm73
Full Member
Posts: 137
|
|
Re: Ultima heater matrix replacement
« Reply #3 on: Mar 28th, 2009, 9:48pm » |
Quote Modify
|
Good Evening Gozz and Scorpio-man,
Thank you for your replies. Years ago I removed both drain valves and machined plugs for both bulkhead drain hoses. Two 8mm I.D. hoses now convey condensate to 6” above the road. The hoses have never blocked and no problems have been apparent. The hot exhaust pipes have to be avoided on the way down.
Coolant is 50% antifreeze.
The clock is illuminated but after 12 years a new bulb may be a good idea.
The matrix is supplied by Foray Parts, No. 1041093 – Radiator and Seal but tonight I discover that the seal is missing. Should I be chasing Trevor Porter for a seal?
The radiator is approx.32 Cms long x 15 Cms wide x 4 Cms thick, all measured to include the foam surrounds.
The garage fitting is scheduled for Wednesday.
Regards Malcolm
|
|
IP Logged |
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print