Author |
Topic: Boot lock motor (Read 1198 times) |
|
tlundkvi
Full Member
Ex. Scorpio 2.9 24V -95
Posts: 909
|
|
Boot lock motor
« on: Jul 9th, 2009, 9:47am » |
Quote Modify
|
My boot lock operates mechanically with key only, pressing the button does not work (either on the boot or remote) I also found a loose connector (inserted in image). The other doors won't unlock when I open the boot. I assume the motor mechanism has been removed at some point, hence the loose connector and hollow space behind the lock cylinder. All locks in the car use the same key. Can I restore "intended" operation just by getting hold of the lock motor and inserting it (offers to PM welcome), or do you see any other fundamental thing missing here? The car is a 24V saloon.
|
|
IP Logged |
|
|
|
Tompion
Administrator
1997 2.3 Ultima estate.
Posts: 2918
|
|
Re: Boot lock motor
« Reply #1 on: Jul 9th, 2009, 10:16am » |
Quote Modify
|
I would imagine you can just replace it. Perhaps the same happened to yours as on mine. It jammed open so I had to remove it until I got another motor as the boot wouldn’t shut.
|
|
IP Logged |
ABS multiplug wheel sensor pins MK IV or MK 20
|
|
|
tlundkvi
Full Member
Ex. Scorpio 2.9 24V -95
Posts: 909
|
|
Re: Boot lock motor
« Reply #2 on: Jul 9th, 2009, 10:51am » |
Quote Modify
|
Thanks, Do you see anything else missing than the motor?
|
|
IP Logged |
|
|
|
Tompion
Administrator
1997 2.3 Ultima estate.
Posts: 2918
|
|
Re: Boot lock motor
« Reply #3 on: Jul 9th, 2009, 11:04am » |
Quote Modify
|
It's a while since I looked at it so can't really say, but I don't think that plug fits the motor - there may be a short loom to convert the plug.
|
|
IP Logged |
ABS multiplug wheel sensor pins MK IV or MK 20
|
|
|
wojtekor
Guest
|
that's the plug for the motor... it doesn't look like there's anything else missing.
|
|
IP Logged |
|
|
|
tlundkvi
Full Member
Ex. Scorpio 2.9 24V -95
Posts: 909
|
|
Re: Boot lock motor
« Reply #5 on: Jul 10th, 2009, 7:44pm » |
Quote Modify
|
Is the motor the same for saloon and wagon?
|
|
IP Logged |
|
|
|
Tompion
Administrator
1997 2.3 Ultima estate.
Posts: 2918
|
|
Re: Boot lock motor
« Reply #6 on: Jul 11th, 2009, 2:38pm » |
Quote Modify
|
on Jul 9th, 2009, 3:17pm, wojtekor wrote:that's the plug for the motor... it doesn't look like there's anything else missing. |
| There’s a bit of loom on my 2.3 saloon.
|
|
IP Logged |
ABS multiplug wheel sensor pins MK IV or MK 20
|
|
|
|