Author |
Topic: RS2000 camshafts to 2.3 16V (Read 12382 times) |
|
Dave2302
Senior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/winnie.gif) 2006 Mercedes S55 AMG, Retired Barefoot Waterskier
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 1119
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: RS2000 camshafts to 2.3 16V
« Reply #40 on: Nov 5th, 2011, 10:13am » |
Quote Modify
|
Hi Dave, Yeah I knew what you meant, but the Cam Pos is definitely used to determine which cylinder is on the firing stroke, so if they are sequential injection they won't run properly Just out of interest, as I'm not totally familiar with the 4 cylinder engines, do they definitely use sequential injection, or do they batch fire the injectors ? If the latter then the sensor isn't really doing anything important Cheers Dave
|
|
IP Logged |
Dave "The 'ol Bear" ex Footer !
|
|
|
Tompion
Administrator
![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif)
![](http://i.imgur.com/YwLOTZk.jpg)
1997 2.3 Ultima estate.
Posts: 2918
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: RS2000 camshafts to 2.3 16V
« Reply #41 on: Nov 5th, 2011, 12:20pm » |
Quote Modify
|
Hi Dave, I can’t state categorically it’s sequential however they’re fed from separate pins on the ECU so that would suggest it is. How it copes presumably depends on how the ECU is programmed so what happens with one car/engine won’t necessarily happen with another. My guess is it either goes over to batch firing or it tries the injector sequence on alternate revs A or alternate revs B (ABABABAB) & settles for the best one. If it were the later you’d wonder why they bother with the cam sensor, my as~umption there would be keeping down the work the ECU has to do is desirable. I can’t detect any difference when disconnecting various sensors, I’ve not come across anything that reduces performance but I imagine emissions & fuel consumption take a hit. Dave I've changed above to my as~umption otherwise it gets changed to I disagreeumption
|
|
IP Logged |
ABS multiplug wheel sensor pins MK IV or MK 20
|
|
|
Mike H
Senior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](http://livinginthepast-audioweb.co.uk/imagex/misc/aurora-8-1-80x80.jpg)
Renault Clio
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 2594
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: RS2000 camshafts to 2.3 16V
« Reply #42 on: Nov 5th, 2011, 1:33pm » |
Quote Modify
|
Apparently camshaft sensor is used to identify cylinder #1 for ignition. http://www.fordscorpio.co.uk/ccmonitor.htm That isn't to say more information isn't derived from that.
|
|
IP Logged |
Mike H
|
|
|
Tekno
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](http://images.allrefer.com/reference/world/flag-images/finland-flag.gif)
Tenho Ruohoranta
Posts: 599
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: RS2000 camshafts to 2.3 16V
« Reply #43 on: Nov 5th, 2011, 5:46pm » |
Quote Modify
|
on Nov 4th, 2011, 10:11am, adrian1981 wrote:So, as a conclusion, the RS2000 camshafts will fit a 2.3 engine, without other modifications? |
| yup. done it. they have the same timings but more lift, and knobs in the same position sensor points for the Hall sensor. rs2000 and scorpio 2.0 16v camshafts are all the same
|
|
IP Logged |
1998 Ford Scorpio Ultima Estate 2.3i 16V
|
|
|
Mike H
Senior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](http://livinginthepast-audioweb.co.uk/imagex/misc/aurora-8-1-80x80.jpg)
Renault Clio
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 2594
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: RS2000 camshafts to 2.3 16V
« Reply #44 on: Nov 5th, 2011, 6:53pm » |
Quote Modify
|
Result!
|
|
IP Logged |
Mike H
|
|
|
|