Author |
Topic: front crank seal 2.3 (Read 484 times) |
|
5stud
Full Member
I'm a YaBB newbie!
Posts: 436
|
 |
front crank seal 2.3
« on: Aug 13th, 2009, 12:14am » |
 Quote  Modify
|
hase any member replased the front crank seal on a 2.3 ford dont sell just the seal you have to buy the front cover at £61 plus vat
|
|
 IP Logged |
|
|
|
Jonnycab
Senior Member
Former owner of 2.3 Ultima Facelift saloon
Posts: 3900
|
|
Re: front crank seal 2.3
« Reply #1 on: Aug 13th, 2009, 1:20am » |
Quote Modify
|
Buy the front cover ?....Do you mean the lower timing chain cover ? 
I had the front crank seal on my 2.3 replaced by the local garage a couple of years ago (didn't fancy doing it myself) & it was only the seal they replaced, the old cover was put back on with a new gasket 
|
|
IP Logged |
|
|
|
gozz
Senior Member
Been around awhile
Posts: 3475
|
|
Re: front crank seal 2.3
« Reply #2 on: Aug 13th, 2009, 8:28am » |
Quote Modify
|
5stud.
Best go to a bearing factor and get a seal to match.
GOZZ.
|
|
IP Logged |
|
|
|
joe-satch
Senior Member
joe satriani is the best guitarist in the world.
Posts: 1161
|
|
Re: front crank seal 2.3
« Reply #3 on: Aug 13th, 2009, 8:55am » |
Quote Modify
|
my local A1 motor stores have front crankshaft oil seals,i replaced a front seal in a friends 2.0ltr sierra only a few weeks ago. .
|
|
IP Logged |
|
|
|
tootman318
Full Member
Leicester City Forever
Posts: 182
|
|
Re: front crank seal 2.3
« Reply #4 on: Aug 13th, 2009, 5:20pm » |
Quote Modify
|
not sure if its the same, but 24v front crank oil seal is the same as my mk3 cortina 2ltr pinto. know this cause ordered 1 for each car, when they came both the same and they both fit!!!!!!!!!
|
|
IP Logged |
Leicester City FC Forever!!!!!
|
|
|
5stud
Full Member
I'm a YaBB newbie!
Posts: 436
|
|
Re: front crank seal 2.3
« Reply #5 on: Aug 18th, 2009, 12:29am » |
Quote Modify
|
dont believe fords epc the seal is sold sepretley under part no 1669254 but at £16. .beter still buy a 56 mm od 42 mm id 7 mm wide seal at £4.be worned if the belt comes off it can go behind the crank puley then pushing the seal into the timing chains .
|
|
IP Logged |
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print