Author |
Topic: removing steering wheel (Read 380 times) |
|
5stud
Full Member
I'm a YaBB newbie!
Posts: 436
|
|
removing steering wheel
« on: Mar 22nd, 2010, 12:27am » |
Quote Modify
|
howe do you remove the steering wheel on a scorpio with cruse control??also can you remove a 2.3 auto engine without lowering the front crose member ??
|
|
IP Logged |
|
|
|
Snoopy
Administrator
Very old.BAD tempered and missing friends.
Posts: 6278
|
|
Re: removing steering wheel
« Reply #1 on: Mar 22nd, 2010, 8:15am » |
Quote Modify
|
There are two (2) size 30 TORX screws at the back of the wheel. trake those out and OFF comes the wheel.. ( You do have to move it a couple of times to get access to the recessed holes the cover then comes off.... the steering workshop manual
|
|
IP Logged |
HELP the FORUM.Please DONATE
|
|
|
Matt
Senior Member
Manual'd and a 4.0 in the making
Posts: 2816
|
|
Re: removing steering wheel
« Reply #2 on: Mar 22nd, 2010, 10:17am » |
Quote Modify
|
if you can get the auto / manual gear box easily then yeah, take the bonnet off and pull out from the top, i prefer the subframe method as its just easier on a 24v
|
|
IP Logged |
FDS2000 Scans - Birmingham
|
|
|
Highlander
Moderator Expert
13 Scorpios, XR4x4, Suzuki SJ413 for off road :)
Posts: 8244
|
|
Re: removing steering wheel
« Reply #3 on: Mar 22nd, 2010, 11:32am » |
Quote Modify
|
Remember and disconnect the battery, activating the airbag will make you jump!
|
|
IP Logged |
on Oct 17th, 2011, 12:35pm, Simmo wrote:I give up ! Too much for an old boy! |
|
|
|
|
gozz
Senior Member
Been around awhile
Posts: 3475
|
|
Re: removing steering wheel
« Reply #4 on: Mar 22nd, 2010, 12:26pm » |
Quote Modify
|
5stud. The 2.3 comes out easily from the top,no need to remove the rad,but leave the aircon compressor behind.Only problem is one or two inaccessible bolts behind the engine if you are not removing the box. GOZZ.
|
|
IP Logged |
|
|
|
|