Author |
Topic: Rattle (Read 637 times) |
|
PJDavis
Senior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](http://i771.photobucket.com/albums/xx357/PJJDavis123/PeteOnCludgy.jpg)
2 x 1995 Jag X300 3.2 / 4.0 (Henley) 1957 XK140
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 1474
|
A quick one! I'm sure I've seen this kind of problem before. I have a wee 'rattle' when going over bumps at slow-speed coming from the off-side only, aye, like 'pot-hole' bumps. To get the 'rattle' when the car is stationery, I have to kick the rear wheel quite hard in the rotation direction at the back of the tyre. There appears to be Nothing loose, around the rear, I picked a few 'chuckies' out of the dish in the rear wishbone thinking the sound maybe similar, but it's still there. It's rather like a faint loose exhaust clamp. Now wasn't there something about the rear calipers? I've checked the calipers and brake pads, and they have the shims fitted, and the 'rattle' is there brakes on or off, also hand-brake on or off. Silly thing really, but if there's any rememberings of a similar nature, share and I'll be grateful. PS. I have NO exhaust clamps, it's one-piece Stainless steel! Peter.
|
|
IP Logged |
I love 'Movvy' 1995 Jaguar XJ6 X300 3.2 (Henley) 1995 Jaguar XJ6 X330 4.0 (Dopey) 1957 Jaguar XK140 USA (converted to RHD, and to have fitted Mk10 420G Engine with BW 65 Auto Trans)
|
|
|
Tompion
Administrator
![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif)
![](http://i.imgur.com/YwLOTZk.jpg)
1997 2.3 Ultima estate.
Posts: 2918
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Rattle
« Reply #1 on: Sep 29th, 2010, 9:11pm » |
Quote Modify
|
This probably isn’t your problem if you’ve not changed the shocks or if you have an estate. When I changed my saloon rear shocks they had metal shrouds (the original were plastic) and they rang over some bumps. I put some insulation tape around the mouth of the shrouds to deaden the ring & some tape around the top of the dampers to act as guides.
|
|
IP Logged |
ABS multiplug wheel sensor pins MK IV or MK 20
|
|
|
gozz
Senior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif) Been around awhile
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 3475
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Rattle
« Reply #2 on: Sep 29th, 2010, 11:31pm » |
Quote Modify
|
PJD. Are the little anti rattle springs OK that are fixed to the top of the rear brake pads,they make an annoying wee rattle if one is busted.What are the shims ? never had any on my cars ! Maybe it's not the little springs if it still does it with the brakes on GOZZ.
|
|
IP Logged |
|
|
|
Jonnycab
Senior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](http://i70.photobucket.com/albums/i101/jonnycab/JP_nitrous.gif)
Former owner of 2.3 Ultima Facelift saloon
Posts: 3900
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Rattle
« Reply #3 on: Sep 30th, 2010, 1:36am » |
Quote Modify
|
Hand brake cable metal shroud loose & rattling against the arm ?
|
|
IP Logged |
|
|
|
PJDavis
Senior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](http://i771.photobucket.com/albums/xx357/PJJDavis123/PeteOnCludgy.jpg)
2 x 1995 Jag X300 3.2 / 4.0 (Henley) 1957 XK140
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 1474
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Rattle
« Reply #4 on: Sep 30th, 2010, 8:37am » |
Quote Modify
|
Thanks for replies so-far. Haven't changed the shocks, and given them a thump, it's not them. Aye, the 'shims' are the springs you refer to, they are right and tight. Jonny, first thing I thought of, these are tight. The rattle does seem to be coming from the caliper area though, even with the wheel off I can't find it. And with the car raised on a trolley-jack it seems reluctant to make the noise! Peter
|
|
IP Logged |
I love 'Movvy' 1995 Jaguar XJ6 X300 3.2 (Henley) 1995 Jaguar XJ6 X330 4.0 (Dopey) 1957 Jaguar XK140 USA (converted to RHD, and to have fitted Mk10 420G Engine with BW 65 Auto Trans)
|
|
|
tlundkvi
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif) Ex. Scorpio 2.9 24V -95
Posts: 909
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Rattle
« Reply #5 on: Sep 30th, 2010, 9:13am » |
Quote Modify
|
Have you checked the stabilizer bar links for play? And bearings (probably a long shot based on the symptoms)?
|
|
IP Logged |
|
|
|
PJDavis
Senior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](http://i771.photobucket.com/albums/xx357/PJJDavis123/PeteOnCludgy.jpg)
2 x 1995 Jag X300 3.2 / 4.0 (Henley) 1957 XK140
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 1474
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Rattle
« Reply #6 on: Sep 30th, 2010, 3:34pm » |
Quote Modify
|
I'VE FOUND IT!!!!!!! I got into work today and was about to place the car on the M/V ramp when I kicked the side of the tyre for the umpteenth time, and the rattle was more prominent. So, just by tapping the tyre it was quite loud. So I carefully reversed the car onto a kerb on the off-side and crawled under it. I started tapping away with a hide-mallet all around the wishbone area and brake caliper. Just by chance I tapped at the bottom of the shockers mounting, and there it was, a large-ish stone caught between the bottom shock mounting and the square cup. I'll have to un-bolt the bottom shock mounting to get it out! But at least I know what it is now.......... Thanks for all the replies. Peter
|
|
IP Logged |
I love 'Movvy' 1995 Jaguar XJ6 X300 3.2 (Henley) 1995 Jaguar XJ6 X330 4.0 (Dopey) 1957 Jaguar XK140 USA (converted to RHD, and to have fitted Mk10 420G Engine with BW 65 Auto Trans)
|
|
|
Mike H
Senior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](http://livinginthepast-audioweb.co.uk/imagex/misc/aurora-8-1-80x80.jpg)
Renault Clio
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 2594
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Rattle
« Reply #7 on: Oct 1st, 2010, 12:04pm » |
Quote Modify
|
Wow, those d**n stones
|
|
IP Logged |
Mike H
|
|
|
|