Author |
Topic: Brake hose Cosworth (Read 463 times) |
|
bonnietiler
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif) Sense of humour .... Essential!
Posts: 215
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Brake hose Cosworth
« on: Oct 6th, 2010, 11:20pm » |
Quote Modify
|
I wonder if anybody can help? I have been looking at stainless hoses for the cossie and 2 sorts state that the full set comprises 6 hoses in total. Can you advise, is that correct? I haven't had a looksee yet, to check if there are indeed a full half-dozen but am promised fine weather this weekend! Many thanks in advance Regards Bonnietiler
|
|
IP Logged |
|
|
|
gozz
Senior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif) Been around awhile
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 3475
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Brake hose Cosworth
« Reply #1 on: Oct 6th, 2010, 11:44pm » |
Quote Modify
|
There are four to the brake calipers,and two on the rear sub frame,why braided ?, plain rubber will last the life of the car GOZZ.
|
|
IP Logged |
|
|
|
bonnietiler
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif) Sense of humour .... Essential!
Posts: 215
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Brake hose Cosworth
« Reply #2 on: Oct 7th, 2010, 8:20am » |
Quote Modify
|
Pure unadulterated vanity I'm afraid..I won a set of Brembo (Gold zinc plated) Front drilled discs. I looked at the previous MOT's (the car has only done 500 miles max between each of the last 10 MOT's)and the last 3 had all warned of corrosion on the Brake pipes, so thinking that it would be a lot cheaper to change these myself rather than let the MOT station do it (should it fail next time). I thought...being of a certain age ... and fondly remembering the old Graham Hill Lotus 49 Gold Leaf colour scheme (red/gold). It occurred to me that Transparent Red pipes and gold discs would look pretty good...completely ignoring the fact that once fitted, they would be impossible to see! But that is the sad truth.."Oh vanity..where is thy sting?" Bonnietiler
|
|
IP Logged |
|
|
|
Simmo
Administrator
![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif) I'm an OAP !
Posts: 5508
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Brake hose Cosworth
« Reply #3 on: Oct 7th, 2010, 8:32am » |
Quote Modify
|
Unless I've missed something here isnt the most likely 'fail' point the brake PIPES which run the length and width of the car as opposed to the connecting hoses?? or are you doing the whole lot??.
|
|
IP Logged |
Now I'm an OAP
|
|
|
bonnietiler
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif) Sense of humour .... Essential!
Posts: 215
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Brake hose Cosworth
« Reply #4 on: Oct 7th, 2010, 8:49am » |
Quote Modify
|
You're quite right, I should have said Brake "hoses" Not pipes. The pipes have been covered in wax-oil (or similar) from new and appear in unblemished condition. The corrosion on the hoses is at the original zinc/cad plated ends. Regards bonnietiler
|
|
IP Logged |
|
|
|
Simmo
Administrator
![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif) I'm an OAP !
Posts: 5508
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Brake hose Cosworth
« Reply #5 on: Oct 7th, 2010, 8:55am » |
Quote Modify
|
All is now clear !.
|
|
IP Logged |
Now I'm an OAP
|
|
|
|