Author |
Topic: Heater blows cold when cranked up to full power (Read 501 times) |
|
Marcello
Junior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif) I'm a YaBB newbie!
Posts: 52
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Heater blows cold when cranked up to full power
« on: Oct 24th, 2010, 10:55pm » |
Quote Modify
|
Hi there, my climate control occassionally blows cold when the temperature is set to HI and turned up to full power. As I have the engine out at the moment, I thought I would investigate as I have the space to have a proper look around. Any suggestions as to what might be the cause of this? Thanks.
|
|
IP Logged |
|
|
|
Jonnycab
Senior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](http://i70.photobucket.com/albums/i101/jonnycab/JP_nitrous.gif)
Former owner of 2.3 Ultima Facelift saloon
Posts: 3900
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Heater blows cold when cranked up to full powe
« Reply #1 on: Oct 25th, 2010, 12:27am » |
Quote Modify
|
Climate control needs re-setting or the heater matrix is blocked. If it's the heater matrix then it's only accessible from inside the vehicle (dash out job), although, with the engine removed, at least it will be easy to remove the matrix in/out hoses
|
|
IP Logged |
|
|
|
|