Author |
Topic: more advice please 24v oil and pulley (Read 417 times) |
|
ro284
Full Member
I'm a YaBB newbie!
Posts: 508
|
|
more advice please 24v oil and pulley
« on: Nov 19th, 2010, 3:38pm » |
Quote Modify
|
First off, the tensioner pulley or roller on the tensioner, the bearings are noisy on mine! can this be replaced without removing the rad? i can get a spanner on it i thing, but is there a locknut the other side? Next, do many owners use fully synthetic oil in these engines? like Mobil 1 Any advice gratefully recieved cheers Bob
|
|
IP Logged |
Bob Dorset
|
|
|
gozz
Senior Member
Been around awhile
Posts: 3475
|
|
Re: more advice please 24v oil and pulley
« Reply #1 on: Nov 19th, 2010, 9:06pm » |
Quote Modify
|
ro284. No lock nut,best remove the unit from the engine,large allen bolt in the centre,easier on the bench,no need to remove the rad. Regarding oil,unless you have a new engine I can't see the benefit of lashing out on expensive oil,and not much benefit if your engine is new GOZZ.
|
|
IP Logged |
|
|
|
|