Author |
Topic: Ultima heater fan (Read 809 times) |
|
Barryb
Guest
|
heater fan runs when switched off can't program HBC. Fan stops if WHITE/BLUE & BROWN/BLUE connector removed. Is it the switch?
|
|
IP Logged |
|
|
|
Tompion
Administrator
1997 2.3 Ultima estate.
Posts: 2918
|
|
Re: Ultima heater fan
« Reply #1 on: Dec 1st, 2010, 9:18pm » |
Quote Modify
|
Check the ribbon cable behind the control panel is latched properly, it can cause this problem.
|
|
IP Logged |
ABS multiplug wheel sensor pins MK IV or MK 20
|
|
|
Barryb
Guest
|
Thanks Tompion. Checked ribbon connector today, clips seem secure on connector, did notice a slight indent in the ribbon on right hand side.
|
|
IP Logged |
|
|
|
|