Author |
Topic: Headlight washers (Read 706 times) |
|
Stes Ultimatum
Junior Member
I'm a YaBB newbie!
Posts: 69
|
|
Headlight washers
« on: Jan 13th, 2011, 5:16pm » |
Quote Modify
|
Hi, My washer jet jetted out from the bumper this afternoon! Any tips on how to put it back in without breaking it ! Is there a diagram of how it fits together ? Thanks Steve
|
|
IP Logged |
|
|
|
mondeoman
Full Member
2.9 24V Cosworth Ultima + 2.3 16V Facelift Ultima
Posts: 376
|
|
Re: Headlight washers
« Reply #1 on: Jan 15th, 2011, 9:59am » |
Quote Modify
|
I've changed the headlight washer on my wife's 2.3 Facelift before. The only way I found to do it was to remove the front bumper carefully placing it on some old sheets to stop marking it etc. You should then have easy access to the screws that fix the washer unit in place. Their are some instructions on this site for fitting an 8 parking sensor kit and that explains who to remove the bumper for a Facelift car, which from the picture you appear to have. Simon
|
|
IP Logged |
|
|
|
PJDavis
Senior Member
2 x 1995 Jag X300 3.2 / 4.0 (Henley) 1957 XK140
Posts: 1474
|
|
Re: Headlight washers
« Reply #2 on: Jan 15th, 2011, 5:37pm » |
Quote Modify
|
I changed my washer by taking out the fog-light cluster. The screws face the wrong way, away from you, but a stumpy screwdriver did the trick. Peter
|
|
IP Logged |
I love 'Movvy' 1995 Jaguar XJ6 X300 3.2 (Henley) 1995 Jaguar XJ6 X330 4.0 (Dopey) 1957 Jaguar XK140 USA (converted to RHD, and to have fitted Mk10 420G Engine with BW 65 Auto Trans)
|
|
|
Stes Ultimatum
Junior Member
I'm a YaBB newbie!
Posts: 69
|
|
Re: Headlight washers
« Reply #3 on: Jan 15th, 2011, 6:20pm » |
Quote Modify
|
Cheers Simon & Peter, I'll have a look for the parking sensors pics! But it will have to wait for now as the water pump's gone on the focus. Steve
|
|
IP Logged |
|
|
|
|