Author |
Topic: Loom pin Differances 2.0 and 2.3 (Read 1979 times) |
|
lesterlad aka Rodders
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](http://i4.photobucket.com/albums/y108/rodders321/Guitarcat.gif)
2.3 Ghia x Estate (Manual)
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 877
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Loom pin Differances 2.0 and 2.3
« on: Feb 17th, 2011, 5:20pm » |
Quote Modify
|
As some of you may recall I fitted a loom from a 2.0 16v Ultima to my 2.3 Ghia X and still had problems even after modifying the air intake and temperature gauge sender connections. IE, fans coming on full blast when engine is cold plus erratic running engine when hot then not restarting until cold. I have now purchased the proper loom for my 2.3 Ghia X and the car is running as sweet as a nut. Below are differences between the loom connection pins for a 2.0 16v Ultima and a 2.3 Ghia X Above........ 2.3 GhiaX Manual with NO Cruise Control or Climate Control Below........2.0 16V ULTIMA Auto
|
|
IP Logged |
There's are methods to my madness!!! I'm not sure what the methods are but there's definitely madness in them
|
|
|
Tompion
Administrator
![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif)
![](http://i.imgur.com/YwLOTZk.jpg)
1997 2.3 Ultima estate.
Posts: 2918
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Loom pin Differances 2.0 and 2.3
« Reply #1 on: Feb 18th, 2011, 12:32am » |
Quote Modify
|
The plug on my 2.3 auto has the same pin layout as the one you’ve labelled as for your 2.3 manual.
|
|
IP Logged |
ABS multiplug wheel sensor pins MK IV or MK 20
|
|
|
|