Author |
Topic: scorpio 95 v6 AT. Into 1991 sierra (Read 593 times) |
|
Steve_Stelex
Newbie
I'm a new member
Posts: 7
|
|
scorpio 95 v6 AT. Into 1991 sierra
« on: Apr 6th, 2011, 8:07pm » |
Quote Modify
|
Hi all, ive got myself another scorpio 95 v6 AT, and want to put the engine into my 1991 sierra shell, but i dont think the gearbox will fit. Does anyone know about this?? and Secondly. Is there any manual gearbox i can fit to the scorpio engine for rwd in the sierra? that will bolt straight into the sierra tunnell? Any advice would be really appretiated. Regards Steve.
|
|
IP Logged |
Steer From The Rear!
|
|
|
Highlander
Moderator Expert
13 Scorpios, XR4x4, Suzuki SJ413 for off road :)
Posts: 8244
|
|
Re: scorpio 95 v6 AT. Into 1991 sierra
« Reply #1 on: Apr 7th, 2011, 8:27am » |
Quote Modify
|
It can all be done. Does/did your Sierra have a type 9 or MT75? I think you will need some modification to the gearbox mountings and propshaft if you intend to keep the autobox. There were a few manual V6 MT75 boxes made but very rare and very expensive. The usual/cheapest procedure is to mate the bellhousing off a V6 4x4 box (Sierra/Granada) to the rear end of a RWD MT75 box. p.s. This site has a lot more info. http://www.fordpower.org.uk/
|
|
IP Logged |
on Oct 17th, 2011, 12:35pm, Simmo wrote:I give up ! Too much for an old boy! |
|
|
|
|
Stixy
Full Member
I should know better
Posts: 414
|
|
Re: scorpio 95 v6 AT. Into 1991 sierra
« Reply #2 on: Apr 8th, 2011, 3:07pm » |
Quote Modify
|
If you use a Sierra autobox mount and auto propshaft it will just nut bolt in without modification to a 91 model . Or for a manual look for an XR4i rwd gearbox prop & flywheel
|
|
IP Logged |
|
|
|
|