Author |
Topic: 2.3 Facelift Headlamp Washers (Read 722 times) |
|
retiredjames
Newbie
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif) I'm a YaBB newbie!
Posts: 41
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
2.3 Facelift Headlamp Washers
« on: Feb 16th, 2012, 4:05pm » |
Quote Modify
|
On checking the operation of the headlamp washers the nearside one flew straight out and the offside did not retract fully into the bumper. I think this was probably due to blocked jets as the washers had not been used for at least six months. Having cleaned the jets I am having a problem replacing them. I can push them in to about half to three quarters of an inch from the bumper but no further. Is there a special way of doing this please? James
|
|
IP Logged |
|
|
|
retiredjames
Newbie
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif) I'm a YaBB newbie!
Posts: 41
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: 2.3 Facelift Headlamp Washers
« Reply #1 on: Feb 19th, 2012, 3:44pm » |
Quote Modify
|
Hi - still a problem assembling headlamp washer jets. Please, does anyone know the method used for the retraction movement? Is it spring loaded on cessation of the water pressure or some mechanical movement of the holder? Also, please, what holds the jets in to stop them ejecting from the holder? I have not looked underneath due to old age and cannot find any link showing details of this. Any information would be greatly appreciated. James
|
|
IP Logged |
|
|
|
a900one
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif) A scorpio is for life not just for christmas
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 980
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: 2.3 Facelift Headlamp Washers
« Reply #2 on: Feb 19th, 2012, 10:11pm » |
Quote Modify
|
The retraction is done by a spring, the pressure of the water pushes the jet up. They should not come apart.
|
|
IP Logged |
|
|
|
Mike H
Senior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](http://livinginthepast-audioweb.co.uk/imagex/misc/aurora-8-1-80x80.jpg)
Renault Clio
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 2594
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: 2.3 Facelift Headlamp Washers
« Reply #3 on: Feb 21st, 2012, 1:33pm » |
Quote Modify
|
Sounds like summink is broke (?)
|
|
IP Logged |
Mike H
|
|
|
Scorp_Kev
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](http://i1116.photobucket.com/albums/k577/Scorp_Kev/IMG_0051-1.jpg)
Scorp Ultima 2.3 1998
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 221
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: 2.3 Facelift Headlamp Washers
« Reply #4 on: Feb 23rd, 2012, 9:49am » |
Quote Modify
|
I have a couple of working ones (I changed the bumper and new one had them in) £10 inc post if interested
|
|
IP Logged |
|
|
|
retiredjames
Newbie
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif) I'm a YaBB newbie!
Posts: 41
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: 2.3 Facelift Headlamp Washers
« Reply #5 on: Mar 2nd, 2012, 4:53pm » |
Quote Modify
|
Hi Kev Many thanks for your response. I tried phoning you but don't seem to get a reply. I have now managed to refit the washer jets, it appears that you need one arm under the bumper holding the washer pipe while pushing the jet in with the other hand. Things seem to be OK now so I'll see how it goes. Many thanks once again, James
|
|
IP Logged |
|
|
|
Mike H
Senior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](http://livinginthepast-audioweb.co.uk/imagex/misc/aurora-8-1-80x80.jpg)
Renault Clio
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 2594
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: 2.3 Facelift Headlamp Washers
« Reply #6 on: Mar 3rd, 2012, 12:13pm » |
Quote Modify
|
Ah good.
|
|
IP Logged |
Mike H
|
|
|
|