Author |
Topic: Suspension (Read 1638 times) |
|
Nightrider1
Newbie
It's all good
Posts: 8
|
Has any one fitted the estate self levelling suspension to a salloon say a 2.3 on a 98 plate for instance as I have one because i tow a caravan and it seems a worth wile upgrade if at all possible
|
|
IP Logged |
|
|
|
Tompion
Administrator
1997 2.3 Ultima estate.
Posts: 2918
|
|
Re: Suspension
« Reply #1 on: Apr 19th, 2013, 9:37pm » |
Quote Modify
|
The mounts & mounting points are quite different in both type & location, I assume it's not practical to do it, but I've never looked under an estate. See here for the differences of the shocks: http://www.fordscorpio.co.uk/images/rearshocks.gif
|
|
IP Logged |
ABS multiplug wheel sensor pins MK IV or MK 20
|
|
|
Nightrider1
Newbie
It's all good
Posts: 8
|
|
Re: Suspension
« Reply #2 on: Apr 19th, 2013, 11:14pm » |
Quote Modify
|
Yep yer right there they are quite different It was just a passing thought Cheers.
|
|
IP Logged |
|
|
|
gozz
Senior Member
Been around awhile
Posts: 3475
|
|
Re: Suspension
« Reply #4 on: Apr 22nd, 2013, 9:27pm » |
Quote Modify
|
on Apr 17th, 2013, 9:33pm, Nightrider1 wrote:Has any one fitted the estate self levelling suspension to a salloon say a 2.3 on a 98 plate for instance as I have one because i tow a caravan and it seems a worth wile upgrade if at all possible |
| You need Monroe kit LA 355,air bags over shockers,the kit comes with piping and a little gauge with a schrader valve on it to inflate or deflate the bags to suit yourself.These are a direct replacement for the saloon,some of which were fitted with an automatic inflate/deflate via a load sensor on the back end and a little compressor behind the front bumper on the nearside.The original Ford units are,or were about £200 odd quid a piece,the complete Monroe kit comes at around the £100 mark.You can mount the gauge on a little bracket in the side of the boot and inflate with a push bike pump,the pipes are best fed through grommets in holes drilled through the uprights near to the pipe inlet on the units.
|
|
IP Logged |
|
|
|
Jonnycab
Senior Member
Former owner of 2.3 Ultima Facelift saloon
Posts: 3900
|
|
Re: Suspension
« Reply #5 on: Apr 29th, 2013, 9:56am » |
Quote Modify
|
You could try fitting KYB RA5308 heavy duty (towing) springs like I did to my old Scorpio taxi. They made a hell of a difference in ride height & stiffness. Seem to remember they were only about £30 each as well
|
|
IP Logged |
|
|
|
|