Author |
Topic: RDS 7000 (Read 1175 times) |
|
Andycan
Full Member
I'm a YaBB newbie!
Posts: 565
|
Is there a knack to getting these out? I have the 2 ford extractor wires and they click into place but the unit just will not budge even with the help of a screwdriver.
|
|
 IP Logged |
|
|
|
Simmo
Administrator
I'm an OAP !
Posts: 5508
|
 |
Re: RDS 7000
« Reply #1 on: Sep 1st, 2013, 1:24pm » |
 Quote  Modify
|
Andy, once they click into place they need to be pressed outwards, towards the passenger door and steering wheel, so that the pressure releases the holding clips. Wiggle with them in that 'stressed' position.It is a bit of a fiddle and knack but that should work. 
|
|
IP Logged |
Now I'm an OAP
|
|
|
Andycan
Full Member
I'm a YaBB newbie!
Posts: 565
|
|
Re: RDS 7000
« Reply #2 on: Sep 1st, 2013, 3:42pm » |
Quote Modify
|
Thanks Simmo
|
|
IP Logged |
|
|
|
Matt
Senior Member
Manual'd and a 4.0 in the making
Posts: 2816
|
|
Re: RDS 7000
« Reply #3 on: Sep 1st, 2013, 8:44pm » |
Quote Modify
|
if you're still stuck
Quote:There is another way of getting to the code on the radio if you dont happen to have a set of radio keys,
if you undo the 4 screws that hold the wooden dash fascia in (2 above the radio and 2 above the steering wheel) the wooden fascia can be pulled out enough with the radio still clipped into it to read the code off the side
|
|
you can also get your fingers on the metal clips and push them in
|
|
IP Logged |
 
FDS2000 Scans - Birmingham
|
|
|
Andycan
Full Member
I'm a YaBB newbie!
Posts: 565
|
|
Re: RDS 7000
« Reply #4 on: Sep 26th, 2013, 3:07pm » |
Quote Modify
|
Thanks Matt the screen on it has gone and I have now replaced it with a 5000rds but it jamms up half way in and won't budge yet there is nothing in the way from what I can see any ideas?
Wouls i be correct in saying you need to take the air con compressor off to change the waterpump on the cosworth? That is my next job along with a new engine loom at the same time lol.
|
|
IP Logged |
|
|
|
Matt
Senior Member
Manual'd and a 4.0 in the making
Posts: 2816
|
|
Re: RDS 7000
« Reply #5 on: Sep 26th, 2013, 4:44pm » |
Quote Modify
|
If its jamming then its either a stray wire or the Y shaped guide on the back is getting stuck on the metal rail.
nah you dont need to take the air con pump off, just the belt.i think you need to take off the waterpump pulley however to remmove all the little bolts that hold it on
|
|
IP Logged |
FDS2000 Scans - Birmingham
|
|
|
Andycan
Full Member
I'm a YaBB newbie!
Posts: 565
|
|
Re: RDS 7000
« Reply #6 on: Sep 26th, 2013, 5:52pm » |
Quote Modify
|
Thanks Matt I have another question both radio's have weak signals and the radio connection is in ok so does it need a new aerial or is there another connection elsewhere that may have come loose?
|
|
IP Logged |
|
|
|
Tompion
Administrator
1997 2.3 Ultima estate.
Posts: 2918
|
|
Re: RDS 7000
« Reply #7 on: Sep 26th, 2013, 6:00pm » |
Quote Modify
|
Unscrewing the aerial & cleaning the earth can help – accessed through the interior light aperture.
|
|
IP Logged |
ABS multiplug wheel sensor pins MK IV or MK 20
|
|
|
Matt
Senior Member
Manual'd and a 4.0 in the making
Posts: 2816
|
|
Re: RDS 7000
« Reply #8 on: Sep 26th, 2013, 6:18pm » |
Quote Modify
|
as above really mate, only other bit to try is cleaning the little connection on the radio, ive seen these go a bit manky, you could also pop a multi meter on either end of the cable to see if it got a high resistance, its just a mini coax cable like what you would have on you tv
|
|
IP Logged |
FDS2000 Scans - Birmingham
|
|
|
Andycan
Full Member
I'm a YaBB newbie!
Posts: 565
|
|
Re: RDS 7000
« Reply #9 on: Sep 26th, 2013, 6:29pm » |
Quote Modify
|
Well that was fun it is getting stuck on the back of the cage it goes into and on trying to wiggle it in I broke the lcd screen so no problem untill I get another radio lol.
Thanks to all the help and suggestions from everyone.
|
|
IP Logged |
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print