Author |
Topic: rocker cover gasket (Read 1848 times) |
|
Bobbit
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/tigger.gif) Scorpio 2.3 ghia x estate
Posts: 253
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
rocker cover gasket
« on: May 22nd, 2014, 7:25pm » |
Quote Modify
|
Hi Guys Could you tell me is it a straight forward job to fit new gaskets to my 2.3 16v, Are there any pitfalls to watch out for. I have a bad oil leak , its been a long time since I worked on an engine. Hope its easy. Cheers guys Bob
|
|
IP Logged |
|
|
|
gozz
Senior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif) Been around awhile
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 3475
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: rocker cover gasket
« Reply #2 on: May 24th, 2014, 1:23am » |
Quote Modify
|
Be careful not to drop the tubular spacers when removing the gasket,and also replace the gaskets around the spark plug holes at the same time to prevent oil leaking into the plug chambers.
|
|
IP Logged |
|
|
|
Jonnycab
Senior Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](http://i70.photobucket.com/albums/i101/jonnycab/JP_nitrous.gif)
Former owner of 2.3 Ultima Facelift saloon
Posts: 3900
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: rocker cover gasket
« Reply #3 on: May 24th, 2014, 3:28am » |
Quote Modify
|
....And make sure you torque the bolts down properly & in the right order. The bolts require very little torque. Too much torque will warp the gasket & strip the delicate aluminium threads in the cylinder head
|
|
IP Logged |
|
|
|
Bobbit
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/tigger.gif) Scorpio 2.3 ghia x estate
Posts: 253
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: rocker cover gasket
« Reply #4 on: May 24th, 2014, 8:07pm » |
Quote Modify
|
Thanks guys, just what i wanted to know. Sounds easy enough. Cheers Bob
|
|
IP Logged |
|
|
|
|