Author |
Topic: set no1 piston at 25mm????? (Read 697 times) |
|
tiggerlit
Full Member
scorpio ultima auto 2.3 estate r reg
Posts: 164
|
|
set no1 piston at 25mm?????
« on: Aug 23rd, 2015, 1:58pm » |
Quote Modify
|
hi hubby is doing the head gasket and it says set no1 piston at 25mm off the top dead centre. and the crankshaft at the same, so the cams will not be in the same position as they were when they came off. also would the piston be set on the upstroke or the down stroke. any ideas please thanks
|
|
IP Logged |
|
|
|
tiggerlit
Full Member
scorpio ultima auto 2.3 estate r reg
Posts: 164
|
|
Re: set no1 piston at 25mm?????
« Reply #1 on: Aug 24th, 2015, 9:55pm » |
Quote Modify
|
anyone
|
|
IP Logged |
|
|
|
Tompion
Administrator
1997 2.3 Ultima estate.
Posts: 2918
|
|
Re: set no1 piston at 25mm?????
« Reply #2 on: Aug 24th, 2015, 10:47pm » |
Quote Modify
|
It’s difficult to answer unless you give a link to where you got the information. The manual I searched for said (prior to fitting the head) “Set the piston of cylinder no. 1 to 25 mm before TDC”.
|
|
IP Logged |
ABS multiplug wheel sensor pins MK IV or MK 20
|
|
|
tiggerlit
Full Member
scorpio ultima auto 2.3 estate r reg
Posts: 164
|
|
Re: set no1 piston at 25mm?????
« Reply #3 on: Aug 26th, 2015, 10:47pm » |
Quote Modify
|
yep that's it
|
|
IP Logged |
|
|
|
Simmo
Administrator
I'm an OAP !
Posts: 5508
|
|
Re: set no1 piston at 25mm?????
« Reply #4 on: Aug 27th, 2015, 2:11pm » |
Quote Modify
|
The details are in The relevant page here.
|
|
IP Logged |
Now I'm an OAP
|
|
|
Matt
Senior Member
Manual'd and a 4.0 in the making
Posts: 2816
|
|
Re: set no1 piston at 25mm?????
« Reply #5 on: Aug 31st, 2015, 2:47pm » |
Quote Modify
|
The 25mm will be before you link the crank and cams via the chain, set the crank so all pistons are down in their bores, fit the head(s) and torque to spec. Set the cams to the correct position then bring the crank round to tdc for no1. Fit chain and rotate by hand with the plugs out to feel for any resistance
|
|
IP Logged |
FDS2000 Scans - Birmingham
|
|
|
|