Author |
Topic: Can ne1 Scan me in Ipswich Suffolk ? (Read 878 times) |
|
macmilm
Newbie
I'm a YaBB newbie!
Posts: 22
|
|
Can ne1 Scan me in Ipswich Suffolk ?
« on: Oct 27th, 2005, 7:46am » |
Quote Modify
|
Got a missfire at present. Have changed spark plugs but still it happens. So wanna find out what is causing it. Thanks all.
|
|
IP Logged |
|
|
|
Eric_R
Administrator
Cosworth Owner 1998 - 2006 & site co-founder
Posts: 1792
|
|
Re: Can ne1 Scan me in Ipswich Suffolk ?
« Reply #1 on: Oct 28th, 2005, 11:36pm » |
Quote Modify
|
Mac, If you could get to Badger's Mount just off J4 on the M25 on Sunday we could scan you there. You don't say what engine you have. If it's a DOHC engine the first thing you should check is the Fuel Cut Off loom - the wires leading from the spark modules under the centre cover. see http://www.fordscorpio.co.uk/dohcloom.htm If its a 12V then we can't scan you because its OBDI not II - but check the rotor arm, distributor cap and leads. If these are old they can have a marked effect on idle. If it's a 24V check that the plugs are tight (but not too tight) and the condition of the HT leads - make sure there's no water inside the spark plug housings. Further investigation may reveal a problem with the HO2S sensors or the EGR - and this would need OBD to find.
|
|
IP Logged |
After a Cosworth, anything else is just ... ordinary
|
|
|
|