Author |
Topic: Error code (Read 1290 times) |
|
peter_scorpio
Newbie
I'm a YaBB newbie!
Posts: 4
|
P0138 Downstream Heated Oxygen Sensor circuit Voltage High - Bank No. 1. P1000 OBD-II Monitor Testing Incomplete. P1131 Lack of Upstream Heated Oxygen Sensor Switch - Sensor Indicates Lean - Bank No. 1. And u1451. What will I search first. Iám frome Sweden. Ford Scorpio 2.0 1996
|
|
IP Logged |
|
|
|
adowds
Full Member
Scorpio Rising
Posts: 259
|
|
Re: Error code
« Reply #1 on: May 14th, 2006, 3:11pm » |
Quote Modify
|
I'm getting a load of HO2 sensor errors which I think are down to loom problems. Also, the fuse for the sensors keeps blowing too (can't remember the fuse number, it's in the auxiliary box. HEBO sensor I think it's listed as). Good luck...
|
|
IP Logged |
|
|
|
scorpio_man
Administrator
Ford Kuga awd
Posts: 5654
|
|
Re: Error code
« Reply #2 on: May 14th, 2006, 4:39pm » |
Quote Modify
|
hi there check the wiring to the lambda sensors and the fuse (#40). the rear (downstream), isn't that important, it's the pre cat one you need working. they start to need replacing at the 80,000 miles mark. u1451. not seen that one before. is the car running, as that's for the PATS system. http://www.fordscorpio.co.uk/codes.htm
|
|
IP Logged |
|
|
|
peter_scorpio
Newbie
I'm a YaBB newbie!
Posts: 4
|
|
Re: Error code
« Reply #3 on: May 14th, 2006, 4:59pm » |
Quote Modify
|
Hi the car´work somtimes then the "engine" goes upp and down then die. somtimes smell petrol. Sorry bad English. U1451 SCP (j1850) Invalid or missing data for function read audible warnings. Scan with Autocom diagnostic Partner AB. autocom /Peter_scorpio
|
|
IP Logged |
|
|
|
scorpio_man
Administrator
Ford Kuga awd
Posts: 5654
|
|
Re: Error code
« Reply #4 on: May 14th, 2006, 6:21pm » |
Quote Modify
|
hi there as i said, check the lambda sensor(s). http://www.fordscorpio.co.uk/obd2scan7.htm also check if the exhaust manifold is cracked. then give the MAF a clean up. http://www.fordscorpio.co.uk/cleanmaf then the IAC Valve ( A in diagram). clean with carb cleaner, then a small drop of a light oil (3in1 or something) on to the sliding valve bit. http://www.fordscorpio.co.uk/obd2scan7.htm If the code had the 'P' in front of it, it would be this. P1451 Lack of Response From Passive Anti-Theft System Module - Engine Disabled. try all these things first and let us know how you get on.
|
|
IP Logged |
|
|
|
|