Author |
Topic: Code P1151 on a 24V (Read 1191 times) |
|
Pegasus
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif) 24V Cosworth Ultima Born: Sept 97, sold Aug 23
Posts: 742
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Code P1151 on a 24V
« on: Sep 24th, 2006, 5:40pm » |
Quote Modify
|
Hi, just done a scan for hiacekim's 24V at the Kent meet today: Got Code P1151 and scan shows upstream cat sensor on bank 2 is flat. Enhanced also gives the result of sensor failure detected (O2S21-FL). The obvious is replace sensor or is there something simpler that can be done? Also, LTFTs ~-14%, STFT on bank 2 goes up to 32% (lean) Bank 1 cat, MAF, TPS, etc look fine. Zipped file available if anyone wants to see it Cheers Paul
|
|
IP Logged |
|
|
|
hiacekim
Newbie
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/smiley.gif) I'm a YaBB newbie!
![hiacekim](https://www.fordscorpio.co.uk/YaBBImages/aim.gif)
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 20
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Code P1151 on a 24V
« Reply #1 on: Sep 24th, 2006, 7:35pm » |
Quote Modify
|
Hi Paul, Once again thank you for your interest and help today, very much appreciated. I hope one of the members can help tie this down , so i can get her running smoothly, Cheers Kim .
|
|
IP Logged |
2.9 cosworth est 1996
|
|
|
scorpio_man
Administrator
![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif)
![](http://img.photobucket.com/albums/v521/scorpio_man/scotland_royal_banner_fl_md_clr.gif)
Ford Kuga awd
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 5654
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Code P1151 on a 24V
« Reply #2 on: Sep 24th, 2006, 9:06pm » |
Quote Modify
|
hi there the ltft might be down to the fuel pressure regulator. see this
|
|
IP Logged |
|
|
|
hiacekim
Newbie
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/smiley.gif) I'm a YaBB newbie!
![hiacekim](https://www.fordscorpio.co.uk/YaBBImages/aim.gif)
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 20
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Code P1151 on a 24V
« Reply #3 on: Nov 7th, 2006, 8:47pm » |
Quote Modify
|
Hi paul ......it was the lambda sensor, just as you said .Now fixed.... total change to cruising ....all jerkyness gone and MOT showed ..CO 0.123.... HC 55 ...LAMBDA 0.999 on the fast idle test and CO 0.014 on natural idle test ...cheers kim
|
|
IP Logged |
2.9 cosworth est 1996
|
|
|
Pegasus
Full Member
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif) 24V Cosworth Ultima Born: Sept 97, sold Aug 23
Posts: 742
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: Code P1151 on a 24V
« Reply #4 on: Nov 9th, 2006, 9:49pm » |
Quote Modify
|
Hi Kim, glad you got it sorted Sad to see you're selling it though All the best Paul
|
|
IP Logged |
|
|
|
|