Author |
Topic: abs fault (Read 1291 times) |
|
cleave
Junior Member
am i bovered!
Posts: 89
|
Hi all,when the abs pump failure code comes up and a new pump is fitted will the abs light remain on untill the code/fault is reset 
|
|
 IP Logged |
|
|
|
scorpio_man
Administrator
Ford Kuga awd
Posts: 5654
|
 |
Re: abs fault
« Reply #1 on: Feb 15th, 2007, 10:39am » |
 Quote  Modify
|
hi there
is this for the newer mk2.0 system? if so, then yes. i'm having a similar problem with a '00 galaxy.
see this.
|
|
IP Logged |
|
|
|
cleave
Junior Member
am i bovered!
Posts: 89
|
|
Re: abs fault
« Reply #2 on: Feb 15th, 2007, 11:30am » |
Quote Modify
|
r reg 2.3 ultima....fitted recon abs pump eventually.Light was off for about 4 hours driving now its back on.No resetting was done after new pump fitted and sensor probs didnt show under ford diagnostics prior to new pump going on.fault from ford was abs pump failure..really doing my head in now...throwing money at a light that wont go off in real annoying noone seems to know what they r doing at my local garages plzzz help it will fail mot with the light on omg
|
|
IP Logged |
|
|
|
scorpio_man
Administrator
Ford Kuga awd
Posts: 5654
|
|
Re: abs fault
« Reply #3 on: Feb 15th, 2007, 11:42am » |
Quote Modify
|
hi there
did it fail will you were driving? on was it on start up?
|
|
IP Logged |
|
|
|
cleave
Junior Member
am i bovered!
Posts: 89
|
|
Re: abs fault
« Reply #4 on: Feb 15th, 2007, 11:56am » |
Quote Modify
|
it was just back on ...on startup 
|
|
IP Logged |
|
|
|
Highlander
Moderator
Expert
13 Scorpios, XR4x4, Suzuki SJ413 for off road :)
Posts: 8244
|
|
Re: abs fault
« Reply #5 on: Feb 15th, 2007, 12:37pm » |
Quote Modify
|
So its showing the same code as it did before?
Possibly a wiring problem?
I had the same fault show up on a 24v which turned out to be the ABS wiring loom cracking up below the radiator
|
|
IP Logged |
on Oct 17th, 2011, 12:35pm, Simmo wrote:I give up !  Too much for an old boy! |
|
|
|
|
cleave
Junior Member
am i bovered!
Posts: 89
|
|
Re: abs fault
« Reply #6 on: Feb 15th, 2007, 12:47pm » |
Quote Modify
|
not had diagnostic done since new pump went on ...should i get it done b4 trying anything else?
|
|
IP Logged |
|
|
|
scorpio_man
Administrator
Ford Kuga awd
Posts: 5654
|
|
Re: abs fault
« Reply #7 on: Feb 15th, 2007, 1:36pm » |
Quote Modify
|
hi there
i'd look at the all the wiring first. you might spot something.
get a scan done after the check.
hth
|
|
IP Logged |
|
|
|
cleave
Junior Member
am i bovered!
Posts: 89
|
|
Re: abs fault
« Reply #8 on: Feb 15th, 2007, 1:43pm » |
Quote Modify
|
ok tnx btw where does all the wiring go from the pump it seems to meet a large loom not long after leaving the pump from what i can see
|
|
IP Logged |
|
|
|
caspathescorp
Newbie
I'm a YaBB newbie!
Posts: 28
|
|
Re: abs fault
« Reply #9 on: May 1st, 2007, 9:13pm » |
Quote Modify
|
hi i know this is a old topic but have Cleaver looked at this "ABS C1095 Hydraulic Pump Motor Circuit Failure" in need/give advice, as i have gust repaired my pump.
hope this helps
|
|
IP Logged |
|
|
|
pat
Full Member
Rover 75. Rover 620. Ford P100 Pickup.
Posts: 545
|
|
Re: abs fault
« Reply #10 on: Jun 8th, 2007, 12:51pm » |
Quote Modify
|
Hi there. Ihave had loads of useful advice off people re-same problem. Had auto elec scan which reported that faulty ecu was the problem but fitting another has not cured it. (see topic abs update in problem forum and abs early April). The advice I have been given is well worth reading. Good luck , Pat. 
|
|
IP Logged |
You don't have to be mad to own a Scorp - but it helps!
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print