Author |
Topic: P0161 (Read 1074 times) |
|
macroy
Full Member
White 24v Ultima Cosworth Estate
 
Posts: 207
|
I have just done a scan and the only code that has come up is P0161 which I understand to be 02 Sensor Heater Circuit Malfunction (Bank 2 Sensor 2) is this correct and what do I need to do to rectify this.Thanks Roy.
|
|
 IP Logged |
|
|
|
scorpio_man
Administrator
Ford Kuga awd
Posts: 5654
|
 |
Re: P0161
« Reply #1 on: Jun 23rd, 2007, 12:53pm » |
 Quote  Modify
|
hi there
you need to replace the sensor on the near side (the rear one), but i wouldn't bother as it doesn't have control over the fueling/running of the car.
weren't you having other issues? nothing else show up? do you have a copy of the scan (was it ran with alex p's obd-2 cable?)
hth
|
|
IP Logged |
|
|
|
macroy
Full Member
White 24v Ultima Cosworth Estate
Posts: 207
|
|
Re: P0161
« Reply #2 on: Jun 23rd, 2007, 1:07pm » |
Quote Modify
|
Hi,yes I have still got the problem with the gearbox it goes in drive and reverse etc but overrevs on gearchange but this has not given me a fault code.I used my laptop with an ELM320 interface and a free software that I downloaded from easy obd.com.Roy.
|
|
IP Logged |
|
|
|
scorpio_man
Administrator
Ford Kuga awd
Posts: 5654
|
|
Re: P0161
« Reply #3 on: Jun 23rd, 2007, 1:33pm » |
Quote Modify
|
hi there
it was just because when using the ve software, gearbox codes sometimes only show in the enhanced mode.
regards
|
|
IP Logged |
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print