Author |
Topic: OBD (Read 1138 times) |
|
TIPPER
Newbie
![*](https://www.fordscorpio.co.uk/YaBBImages/star.gif)
![](https://www.fordscorpio.co.uk/YaBBImages/avatars/blank.gif) I'm a YaBB newbie!
Posts: 15
|
Got interface cable!!!!!! now can anyone tell me in plan english how to use it
|
|
IP Logged |
|
|
|
scorpio_man
Administrator
![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif) ![*](https://www.fordscorpio.co.uk/YaBBImages/staradmin.gif)
![](http://img.photobucket.com/albums/v521/scorpio_man/scotland_royal_banner_fl_md_clr.gif)
Ford Kuga awd
![Email](https://www.fordscorpio.co.uk/YaBBImages/email.gif)
Posts: 5654
|
![](https://www.fordscorpio.co.uk/YaBBImages/xx.gif) |
Re: OBD
« Reply #1 on: Aug 12th, 2007, 9:52pm » |
Quote Modify
|
hi there in a word, no! it's a suck it and see sort of thing. read though all the pages about obd on the site, then go have a play with it. http://www.fordscorpio.co.uk/homediag.htm the main bits to look at are.... you need to scan the following... RPM MAF LTFT BOTH LAMBDA SENSORS run these for 5 mins at idle (a/c OFF). every minute, blip the throttle to 2k rpm. end this scan. then do another scan, switching on and off various temp sensors. also check the tps with the engine off (ignition on). should be from 16% to 92% ish. try not to drive it on the scan. oh, check the box with auto re-connect under the GATEWAY, PROTOCOL tabs. that way it should continue to scan even if you need to re-start the engine. hth
|
|
IP Logged |
|
|
|
|