Author |
Topic: Problems connecting. Failing loom? (Read 1516 times) |
|
Kjetil S
Senior Member
2001 BMW 520iat
Posts: 1419
|
 |
Problems connecting. Failing loom?
« on: Aug 15th, 2007, 2:05pm » |
 Quote  Modify
|
I just tried doing a scan on my 2.0 16v with my tricom cable, and it doesn't seem to connect. It seems like it connects to the tricom adapter just fine, but the car won't respond at all.
Here's the log:
Quote:
Wed 15 Aug 2007 version 1.52
12:54:53.3 - initializing serial port
12:54:53.3 - connected rs232 port 1
12:54:53.3 - Initializing vehicle using Trican, Tricom, Indo Router
12:54:53.4 - Log In #1 SAE J1850 VPW @ 120
12:54:56.4 - timeout 5 mode= $01
12:54:56.4 - no response
12:54:56.4 - Log In #1 SAE J1850 PWM @ 120
12:54:59.4 - timeout 5 mode= $01
12:54:59.4 - no response
12:54:59.4 - Login #1 ISO 9141-2 @ 120 10 25
12:54:59.4 - Login #1 ISO/DIS KWP2000-4 slow @ 120 10 25
12:54:59.4 - Login #1 ISO/DIS KWP2000-4 fast @ 120 10 25
12:55:19.9 - timeout 5 mode= $01
12:55:19.9 - no response
12:55:40.4 - timeout 5 mode= $01
12:55:40.4 - no response
12:55:43.4 - timeout 5 mode= $81
12:55:43.4 - no response
12:55:43.4 - Login #1 ISO 9141-2 @ 120 10 25
12:55:43.4 - Login #1 ISO/DIS KWP2000-4 slow @ 120 10 25
12:55:43.4 - Login #1 ISO/DIS KWP2000-4 fast @ 120 10 25
12:56:03.9 - timeout 5 mode= $01
12:56:03.9 - no response
12:56:24.5 - timeout 5 mode= $01
12:56:24.5 - no response
12:56:27.5 - timeout 5 mode= $81
12:56:27.5 - no response
12:56:29.5 - Log In #2 SAE J1850 VPW @ 120
12:56:32.5 - timeout 5 mode= $01
12:56:32.5 - no response
12:56:32.5 - Log In #2 SAE J1850 PWM @ 120
12:56:35.5 - timeout 5 mode= $01
12:56:35.5 - no response
12:56:35.5 - Login #2 ISO 9141-2 @ 120 10 25
12:56:35.5 - Login #2 ISO/DIS KWP2000-4 slow @ 120 10 25
12:56:35.5 - Login #2 ISO/DIS KWP2000-4 fast @ 120 10 25
12:56:56.0 - timeout 5 mode= $01
12:56:56.0 - no response
12:57:16.5 - timeout 5 mode= $01
12:57:16.5 - no response
12:57:19.5 - timeout 5 mode= $81
12:57:19.5 - no response
12:57:19.5 - Login #2 ISO 9141-2 @ 120 10 25
12:57:19.5 - Login #2 ISO/DIS KWP2000-4 slow @ 120 10 25
12:57:19.5 - Login #2 ISO/DIS KWP2000-4 fast @ 120 10 25
12:57:40.0 - timeout 5 mode= $01
12:57:40.0 - no response
12:58:00.6 - timeout 5 mode= $01
12:58:00.6 - no response
12:58:03.7 - timeout 5 mode= $81
12:58:03.7 - no response
12:58:05.6 - Log In #3 SAE J1850 VPW @ 120
12:58:08.7 - timeout 5 mode= $01
12:58:08.7 - no response
12:58:08.7 - Log In #3 SAE J1850 PWM @ 120
12:58:11.7 - timeout 5 mode= $01
12:58:11.7 - no response
12:58:11.7 - Login #3 ISO 9141-2 @ 120 10 25
12:58:11.7 - Login #3 ISO/DIS KWP2000-4 slow @ 120 10 25
12:58:11.7 - Login #3 ISO/DIS KWP2000-4 fast @ 120 10 25
12:58:32.2 - saved 0 messages 2 KB to :
C:\NOCONECT
manufacturer files:
Core
Not Defined
none
|
|
Any tips? Usual places for the loom to fail?
|
|
 IP Logged |
http://uncyclopedia.org/wiki/Norway
|
|
|
scorpio_man
Administrator
Ford Kuga awd
Posts: 5654
|
|
Re: Problems connecting. Failing loom?
« Reply #1 on: Aug 16th, 2007, 6:37am » |
Quote Modify
|
I am assuming you have the tricom cable with the box that plugs into the obd socket? the basic pwm/iso cable didnt work for me.
Can sense your frustration with this ..it drove me nuts; software is not friendly and is buggy.
go to options/gateway
filters page tick all boxes
protocol page tick all boxes except..send mode/initiate mode/CAN/default (sae ISO) ....speed set to 120
interface page both ports must be the same and tick the tricom interface nothing else ticked
hi there
try these settings.....
btw, sent you an email. 
hth
|
|
IP Logged |
|
|
|
Kjetil S
Senior Member
2001 BMW 520iat
Posts: 1419
|
|
Re: Problems connecting. Failing loom?
« Reply #3 on: Aug 16th, 2007, 1:13pm » |
Quote Modify
|
No workies 
I recieved some more advice here (sorry for double posting)
Should perhaps continue the discussion in the other thread.
|
|
IP Logged |
http://uncyclopedia.org/wiki/Norway
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print