Author |
Topic: EEC-IV test and results (Read 1295 times) |
|
Geoff_W
Senior Member
98 Ulti2.5tdi Auto
Posts: 1340
|
|
EEC-IV test and results
« on: Jun 13th, 2008, 9:59pm » |
Quote Modify
|
I have just used the Project tester for the first time on my 12valve and got the following codes 1 Slow Code 10 2 Slow Code 10 3 Fast Code 76 4 FAST KAM 10 5 FAST KAM 11 6 Slow Code 76 7 Slow Code 61 8 Slow KAM 30 Which was nice Has anybody got access to the codes and can give me a commentary?
|
|
IP Logged |
The winding road goes on and on... or at least it does in Northumberland
|
|
|
Geoff_W
Senior Member
98 Ulti2.5tdi Auto
Posts: 1340
|
|
Re: EEC-IV test and results
« Reply #2 on: Jun 13th, 2008, 10:47pm » |
Quote Modify
|
Thanks Andrew, Great for running the tests but does not appear to identify codes. I will bring my tester to Harewood and will try to track down appropriate codes.
|
|
IP Logged |
The winding road goes on and on... or at least it does in Northumberland
|
|
|
Tompion
Administrator
1997 2.3 Ultima estate.
Posts: 2918
|
|
Re: EEC-IV test and results
« Reply #3 on: Jun 14th, 2008, 3:59am » |
Quote Modify
|
Hopefully someone who knows will be along, but looking through the Haynes fault codes manual for Ford EEC IV “enhanced” two digit codes (2.4/2.9 V6 cat & 1.8CFi). Possibly: 10 Command code/seperator code for KAM 10 operator action required as follows: Engine running: Load engine by blipping the throttle. The engine speed must exceed 2500rpm (possibly may generate a code if action not taken) 11 No fault (also see screenshot here: http://homepage.ntlworld.com/a.harby2/ggpfcr02.html (although different engine)) 30 Marker code - identifies ECM for 6 cylinders 61 Coolant temp sensor circuit voltage too low 76 Unused (although the “basic” codes for the 2.8 show it as brake on) Looking through Grahams FCR program 76 may be: Insufficient VAF change during dynamic response test Dave
|
|
IP Logged |
ABS multiplug wheel sensor pins MK IV or MK 20
|
|
|
|