Author |
Topic: Can a 1995 2.0 16V be OBD2 scanned? (Read 5112 times) |
|
Froscio
Newbie
I'm a YaBB newbie!
Posts: 30
|
 |
Re: Can a 1995 2.0 16V be OBD2 scanned?
« Reply #20 on: Nov 14th, 2008, 4:26pm » |
 Quote  Modify
|
I have applied for membeship.
|
|
 IP Logged |
|
|
|
Highlander
Moderator
Expert
13 Scorpios, XR4x4, Suzuki SJ413 for off road :)
Posts: 8244
|
|
Re: Can a 1995 2.0 16V be OBD2 scanned?
« Reply #21 on: Nov 14th, 2008, 4:41pm » |
Quote Modify
|
Me 2 
|
|
IP Logged |
on Oct 17th, 2011, 12:35pm, Simmo wrote:I give up !  Too much for an old boy!  |
|
|
|
|
scorpio_man
Administrator
Ford Kuga awd
Posts: 5654
|
|
Re: Can a 1995 2.0 16V be OBD2 scanned?
« Reply #22 on: Nov 14th, 2008, 5:10pm » |
Quote Modify
|
all done! 
|
|
IP Logged |
|
|
|
Froscio
Newbie
I'm a YaBB newbie!
Posts: 30
|
|
Re: Can a 1995 2.0 16V be OBD2 scanned?
« Reply #23 on: Nov 14th, 2008, 5:28pm » |
Quote Modify
|
Thanks man, it will try it then (cross my fingers).
|
|
IP Logged |
|
|
|
Froscio
Newbie
I'm a YaBB newbie!
Posts: 30
|
|
Re: Can a 1995 2.0 16V be OBD2 scanned?
« Reply #24 on: Nov 15th, 2008, 6:15pm » |
Quote Modify
|
Well, i don't think this is supposed to happen. I tried VE151 with the USBDR805 driver today, and no luck. I even tried an old PC with serial port, so the USB problem should be eliminated, but nothing.
The fact of the matter is that the log looks EXACTLY the same if the ignition is off as it is when on !!!
|
|
IP Logged |
|
|
|
Froscio
Newbie
I'm a YaBB newbie!
Posts: 30
|
|
Re: Can a 1995 2.0 16V be OBD2 scanned?
« Reply #26 on: Nov 16th, 2008, 6:16pm » |
Quote Modify
|
Well, this is a picture of my plug:
And if you look at the pinout connection at your link, it should be the same as 2,5 TD and 2.9 12V:
http://www.fordscorpio.co.uk/star.htm
What gives?
|
|
IP Logged |
|
|
|
gozz
Senior Member
Been around awhile
Posts: 3475
|
|
Re: Can a 1995 2.0 16V be OBD2 scanned?
« Reply #27 on: Nov 16th, 2008, 9:38pm » |
Quote Modify
|
The 12v only uses pins 3 5 11 and 16 and is OBD 1.Any EEC V equipped car needs OBD 2.
GOZZ.
|
|
IP Logged |
|
|
|
Froscio
Newbie
I'm a YaBB newbie!
Posts: 30
|
|
Re: Can a 1995 2.0 16V be OBD2 scanned?
« Reply #28 on: Dec 2nd, 2008, 10:56pm » |
Quote Modify
|
Strange ! Went to the Ford dealer today, to get a scan done. They made contact with the ABS, and cleared a code from a defect wheelsensor(witch i had changed) and read a code 5095 Pump motor failure.
BUT, they could NOT connect to the engine !!! The guy did'nt understand it either, as he said it should work. He got the log connected though, so i could see the O2 sensors seem to work, etc.
|
|
IP Logged |
|
|
|
ADroste
Full Member
S-Type 2.7D SE 2008 replaced Scorpio 2.3 Ult.1998
Posts: 598
|
|
Re: Can a 1995 2.0 16V be OBD2 scanned?
« Reply #29 on: Dec 2nd, 2008, 11:54pm » |
Quote Modify
|
on Nov 13th, 2008, 6:47pm, Froscio wrote:
Apparently VE Gateway is set to COM2 to communicate with the lead. If I were you, I would triple check that the Windows device manager really contains the USB adapter owning COM2 for communication. If not you can change it via the extended options for the COM port.
Regards
Armin
|
|
IP Logged |
|
|
|
Froscio
Newbie
I'm a YaBB newbie!
Posts: 30
|
|
Re: Can a 1995 2.0 16V be OBD2 scanned?
« Reply #30 on: Dec 3rd, 2008, 6:24pm » |
Quote Modify
|
Yes i am aware of this, and made sure it was the same com port on both VE and the device manager. No luck.
But since the dealer could connect to the ABS (ISO) but not the engine (PWM), could it be a fault in the OBD2 connector in the car?
|
|
IP Logged |
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print