Author |
Topic: ELM327 USB CAN Code Reader E-OBD-2 Scanner Diagnos (Read 4237 times) |
|
hopper
Junior Member
GRIMREAPER
Posts: 78
|
 |
ELM327 USB CAN Code Reader E-OBD-2 Scanner Diagnos
« on: Dec 26th, 2008, 10:48pm » |
 Quote  Modify
|
Hi,
Has anyone purchased this item on Ebay ELM327 USB CAN Code Reader E-OBD-2 Scanner Diagnostic from a-tech-diagnostics? It is listed at £26.99 + £4.99 P&P it comes complete the 16 pin connector for the car the other end to the diagnostic unit then another cable with 2 usb connections to fit from diagnostic to laptop and to finish off the CD with the programme to interprut the data. Full product listing is as follows:-
Features & Benefits
This ELM327 USB is the latest PC-based scan tool. It supports all OBD-II protocols and it is dispatched with a number of compatible programs. The output protocol (connection to laptop) is USB.OBD-II Software for ELM327 USB is a free program that allows you to use your PC and a hardware interface to get the information from your car's computer.
The program is very user-friendly, and easy to learn. It is also very easy to install: simply extract the files into a folder on your computer's hard drive, and you're ready to go. To uninstall the program, simply delete the entire contents of the folder where the program resides.
Benefits
Retrieve and clear trouble codes and turn off the MIL ("Check Engine" light)
Analyse your cars data in real-time
Analyse your data using graphs and comparing multi-real-time feeds
Perform fault diagnostic tests
Engine RPM
Calculate load value
Coolant temperature
Fuel system status
Vehicle speed
Short-term fuel trim
Long-term fuel trim
Intake manifold pressure
Timing advance intake
Air temperature
Air flow rate
Absolute throttle position
Oxygen sensor voltages/associated
fuel system status
fuel pressure
and a lot more
Compatibility:
GM '96 - Current Year (OBD-II)
Ford '96 - Current Year (OBD-II)
Chrysler '96 - Current Year (OBD-II)
Toyota '96 - Current Year (OBD-II)
Honda '96 - Current Year (OBD-II)
NISSAN '96 - Current Year (OBD-II)
All other Asian and European '96 - Current Year (OBD-II)
User Instructions
1 Download the shareware scantoo_net in your laptops and PCs.
2 Run it and follow the prompts to allow it to install it own.
Note: You have to install software on your PC's hard disk,it will not run properly if you try to use it directly from a floppy or CD. However, you can use a floppy or CD to move the distribution file from a PC with internet access to another PC that does not have internet access.
3 Connect the interface between the computer and the car by plugging one end of the interface into a Serial (RS232) or USB port on your PC and the other end directly into the OBD-II port present in all 1996 and newer OBD2 passenger vehicles.
4 Please turn the car's ignition switch ON. you dont need to start the engine.
5 Please Start the software program, click "Options", you need to select the correct communications port, please use "Test" to confirm that the program can use the port and find the interface. Then "Save".
6 Now it should work, please ,ake sure the software can reliably access all the control modules that it should in your car.
7 you can read diagnostic trouble fault codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic fault code definitions in the database). ? Clear fault trouble fault codes and turn off the MIL ("Check Engine" "Service soom"light) ? Show current sensor data, including: o Engine RPM o Calculated Load Value o Coolant Temperature o Fuel System Status o Vehicle Speed o Short Term Fuel Trim o Long Term Fuel Trim o Intake Manifold Pressure o Timing Advance o Intake Air Temperature o Air Flow Rate o Absolute Throttle Position o Oxygen sensor voltages/associated short term fuel trims o Fuel System status o Fuel Pressure
Comes in the package
One ELM237 Reader
Two Cables
One free share software CD
User Instruction
I'm looking to purchase one but I'm interested if anyone has any feedback about this produt good or bad. Most of the postings here list a www.obd-2.com link where the software is free once a lead is purchased.
Regards Chris
|
|
 IP Logged |
Scorpio 24v Cosworth Estate 1995 M reg
|
|
|
workshopboy
Newbie
98 2.3 Ultima Estate Facelift
 
Posts: 46
|
|
Re: ELM327 USB CAN Code Reader E-OBD-2 Scanner Dia
« Reply #1 on: Dec 27th, 2008, 1:05pm » |
Quote Modify
|
Hi
I have this outfit at present and It works ok on the Scorp for engine diagnostics. It won't however read ABS or the autobox codes. It works well on most cars to be honest but only on Engine Electronics.
Andy
|
|
IP Logged |
" You can't close what you haven't opened."
|
|
|
david49uk
Full Member
I'm a YaBB newbie!
Posts: 282
|
|
Re: ELM327 USB CAN Code Reader E-OBD-2 Scanner Dia
« Reply #2 on: Mar 2nd, 2009, 3:02am » |
Quote Modify
|
i have one aswell worked great on my 2.3 and my mates modeo 2.0 also is 2.5 but no joy with my cossie any idears, dave
|
|
IP Logged |
|
|
|
scorpio_man
Administrator
Ford Kuga awd
Posts: 5654
|
|
Re: ELM327 USB CAN Code Reader E-OBD-2 Scanner Dia
« Reply #3 on: Mar 2nd, 2009, 8:22am » |
Quote Modify
|
hi there
sounds like you have a faulty pin on the obd socket. make sure they're all straight, etc.
hth
|
|
IP Logged |
|
|
|
Big_Green_Tank
Full Member
I'm a YaBB newbie!
Posts: 151
|
|
Re: ELM327 USB CAN Code Reader E-OBD-2 Scanner Dia
« Reply #4 on: Apr 1st, 2009, 11:40am » |
Quote Modify
|
Well I have one and it reads the Jag codes no bother.
|
|
IP Logged |
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print