Author |
Topic: bad start (Read 1390 times) |
|
NormanHall
Junior Member
Scorpio-itis
Posts: 84
|
I have a 2.9-12v and only this week it has been a poor starter, and when moving away it cuts out. My son has the latest snap on electronic diagnostic tester but it fails to scan this model scorpio, has anyone in the North East got the kit to run a check?
|
|
IP Logged |
|
|
|
homer2themax
Junior Member
'95 12v Aubergine Saloon
Posts: 97
|
|
Re: bad start
« Reply #1 on: Oct 29th, 2009, 5:23pm » |
Quote Modify
|
12v's have different PCM to the rest. See this http://www.fordscorpio.co.uk/star.htm for details of how to test on a 12v. Personally, my 12v when I bought it would start and then cut out, then restarting was a chore and until it warmed up the idle was all over the place. Swopping the TPS solved it. Hth Mark
|
|
IP Logged |
|
|
|
5stud
Full Member
I'm a YaBB newbie!
Posts: 436
|
|
Re: bad start
« Reply #2 on: Oct 29th, 2009, 6:39pm » |
Quote Modify
|
look at 12v stoping.ask need advice
|
|
IP Logged |
|
|
|
|