Author |
Topic: ABS codes (with Alex's tricom lead) ? (Read 3629 times) |
|
Tekno
Full Member
Tenho Ruohoranta
 
Posts: 599
|
 |
ABS codes (with Alex's tricom lead) ?
« on: Jan 20th, 2010, 5:46pm » |
 Quote  Modify
|
Hello
My problem is abs fault bulb coming when I drive over 12mph
Can anyone tell step by step how to read abs codes?
I just get PWM Server no response -error
This is what I've managed so far:
http://img156.imageshack.us/img156/586/response.png
|
|
 IP Logged |
1998 Ford Scorpio Ultima Estate 2.3i 16V
|
|
|
Tompion
Administrator
1997 2.3 Ultima estate.
Posts: 2918
|
|
Re: ABS codes (with Alex's tricom lead) ?
« Reply #1 on: Jan 20th, 2010, 6:45pm » |
Quote Modify
|
Tick the Ford option diagnostic mode - towards the bottom right of the box in your screen grab.
You may need to click request a few times before it works.
|
|
IP Logged |
ABS multiplug wheel sensor pins MK IV or MK 20
|
|
|
Tekno
Full Member
Tenho Ruohoranta
Posts: 599
|
|
Re: ABS codes (with Alex's tricom lead) ?
« Reply #2 on: Jan 20th, 2010, 6:53pm » |
Quote Modify
|
Should the car be driven first so abs/tcs -lights illuminate?
|
|
IP Logged |
1998 Ford Scorpio Ultima Estate 2.3i 16V
|
|
|
Tekno
Full Member
Tenho Ruohoranta
Posts: 599
|
|
Re: ABS codes (with Alex's tricom lead) ?
« Reply #3 on: Jan 20th, 2010, 7:17pm » |
Quote Modify
|
Thank you very much!
C1095 ABS Hydraulic Pump Motor Circuit Failure
http://img718.imageshack.us/img718/535/abs.png
What should I do now?
|
|
IP Logged |
1998 Ford Scorpio Ultima Estate 2.3i 16V
|
|
|
gozz
Senior Member
Been around awhile
Posts: 3475
|
|
Re: ABS codes (with Alex's tricom lead) ?
« Reply #4 on: Jan 20th, 2010, 7:27pm » |
Quote Modify
|
Ask Tompion how to resolder the motor plug wires in the ABS module 
GOZZ.
|
|
IP Logged |
|
|
|
Tompion
Administrator
1997 2.3 Ultima estate.
Posts: 2918
|
|
Re: ABS codes (with Alex's tricom lead) ?
« Reply #5 on: Jan 20th, 2010, 8:22pm » |
Quote Modify
|
Quite likely as Gozz says but first check fuses 46 & 47 (It’s only one of them but I can’t remember which fuse is for the pump) & that power is getting to the ABS module plug – the 2 pairs of heavy gauge wires. If you unplug the pump & connect it to those wires in the multiplug you’ll test the pump & the feed at the same time (they are permanently live so take care not to short them).
If the pump & power are OK then it’s quite likely the module needs repairing:
http://www.fordscorpio.co.uk/abscontrollerrepair.htm
The link is for the later type of ABS but the same repair can be done on the earlier type.
|
|
IP Logged |
ABS multiplug wheel sensor pins MK IV or MK 20
|
|
|
Tekno
Full Member
Tenho Ruohoranta
Posts: 599
|
|
Re: ABS codes (with Alex's tricom lead) ?
« Reply #6 on: Jan 20th, 2010, 8:36pm » |
Quote Modify
|
ABS and TCS works as long as i dont exceed ~12mph. Also if I floor it from stationary, TCS works as long as tires keep spinning. Then when I stop accelerating more, abs and traction control bulbs appear and also abs and traction control is gone until I restart car.
|
|
IP Logged |
1998 Ford Scorpio Ultima Estate 2.3i 16V
|
|
|
|
Home
Help
Search
Members
Login
Reply
Send Topic
Print