Author |
Topic: parts (Read 680 times) |
|
mick_66
Full Member
Posts: 174
|
Are parts for 2.9 compatable with a 2.3 enginge ie, starter/alternator, exhaust,manifold even battery?? got a chance of a 2.9 going,so was wondering what I can keep off it.. cheers Mick..
|
|
IP Logged |
|
|
|
scorpio_man
Administrator
Ford Kuga awd
Posts: 5654
|
|
Re: parts
« Reply #1 on: May 29th, 2009, 7:09pm » |
Quote Modify
|
hi there the only thing that will change over is the battery! remember you have a 4 pot, the 12 is a V6! you should forget the engine side of it as i don't think anything else fits (but not sure). hth
|
|
IP Logged |
|
|
|
mick_66
Full Member
Posts: 174
|
|
Re: parts
« Reply #2 on: May 29th, 2009, 8:42pm » |
Quote Modify
|
thanks andrew,so only the running gear would be all ok,would still be worth getting if all goes to plan. cheers mick
|
|
IP Logged |
|
|
|
gozz
Senior Member
Been around awhile
Posts: 3475
|
|
Re: parts
« Reply #3 on: May 29th, 2009, 11:21pm » |
Quote Modify
|
Mick. The brakes may differ,particularly front,the ECU ,presuming it's a 12 valve engine,is the EEC IV as against EEC V,the autobox is semi electronic only,the drive shafts are bigger and the diff has a higher ratio.A lot of things electrical and electronic,modules etc will be compatible though. GOZZ.
|
|
IP Logged |
|
|
|
mick_66
Full Member
Posts: 174
|
|
Re: parts
« Reply #4 on: May 30th, 2009, 7:30am » |
Quote Modify
|
So maybe the 2.9 's not a good idea after all. Will maybe have to lie in wait , ready to pounce on a 2.3 thanks gozz.
|
|
IP Logged |
|
|
|
|