Author |
Topic: Front suspension spring broken, how do i change it (Read 474 times) |
|
sterio
Newbie
I love YaBB 1G - SP1!
Posts: 41
|
|
Front suspension spring broken, how do i change it
« on: May 20th, 2004, 7:11am » |
Quote Modify
|
My right spring on the front suspension has broke at the bottom part. I whant to change it by my self. Has somone done it? Is it easy? I havent found any advice on the site other than changing the hole front suspension. Just changing the spring must be easier? Can any one help me how to do it? I understand i have to compress the spring, but what do i have to remove. Is it from the top in the engine compartment? Thanks Dave
|
|
IP Logged |
|
|
|
Snoopy
Administrator
Very old.BAD tempered and missing friends.
Posts: 6278
|
|
Re: Front suspension spring broken, how do i chang
« Reply #1 on: May 20th, 2004, 7:16am » |
Quote Modify
|
In a word Yes.. to replace the spring is basically the same as replacing the suspension unit... It has to be removed from the car and you will need a spring clamp.. if you want the technical details of how to do it them email me off site and I will send the procedure in PDF doc.. hmacsnoopy@hotmail.com Cheers Snoopy
|
|
IP Logged |
HELP the FORUM.Please DONATE
|
|
|
sterio
Newbie
I love YaBB 1G - SP1!
Posts: 41
|
|
Re: Front suspension spring broken, how do i chang
« Reply #2 on: May 20th, 2004, 8:54am » |
Quote Modify
|
Okay! I seems a little bit difficult. Will a be able to do it? I did the linkarms by my self. And the rear discs and pads. But not something like this. Is the pdf document exactly the same as the procedure in the service and repair "change front suspension"? In that case i can just print it out as it is. But if it has mare details please email me at bjorkquist@home.se Thanks Dave
|
|
IP Logged |
|
|
|
Goldwinger
Newbie
I love YaBB 1G - SP1!
Posts: 20
|
|
Re: Front suspension spring broken, how do i chang
« Reply #3 on: May 20th, 2004, 1:23pm » |
Quote Modify
|
I replaced my front spring a few weekends ago. It is quite an easy job but make sure that you have good STRONG spring compressor as the spring takes some compressing.
|
|
IP Logged |
|
|
|
|